Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Bonnie G - February 2, 2020
Verified Purchase
Easy to replace
Easy to replace, very straight forward and it solved my problem.
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Donald
December 17, 2018
The push button switch i have is half melted, is this part the replacement for this model, i can't perfectly match it cause melted part
For model number Whirlpool model CEM2750KQ3
Hi Donald,
Thank you for your question. The part number listed under your model number for the push button switch is PS11753007. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bob
January 5, 2024
Changed all sensors everything work but no heat was wondering if this part could make it not heat
For model number CEM2940TQ1
Hi Bob, thank you for getting in touch. This push button switch does not cause the dryer to not heat. We recommend checking the heating element. If it is fine, check the drive motor, part number PS334304. Dryer drive motors have a centrifugal switch that energizes a start winding when the motor is first started and closes a heat cycle contact to allow the heat source to work. If the motor's centrifugal switch is faulty, either the motor will not run or the motor will run, but the dryer will not heat. Since most centrifugal switches are not sold separately, the entire motor will need to be replaced if the switch is defective. Good luck with the repair!
