Models > CAM2752RQ0

CAM2752RQ0 Whirlpool Washer - Overview

Get Parts and Repair Help for CAM2752RQ0

If you know the washer repair part you need, you can browse the list of all parts on the CAM2752RQ0, or you can search by name or part description. You can also find your part by where it is located on the CAM2752RQ0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your washer. We’ve also included any installation videos we have for CAM2752RQ0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$28.99

Direct Drive Water Pump

It is intended for use with washing machines that do not have belts. This drain pump has two ports for water to pass through: a large one, and a smaller one.

Order within the next 1 hr and 57 mins and your part ships today!
$2.84

Suspension Spring

Sold Individually. Appliance takes 3 of this part.

Order within the next 1 hr and 57 mins and your part ships today!
$4.54

Agitator Bolt

This kit contains one screw with rubber gasket and threaded sealant. The screw head is 7/16".

Order within the next 1 hr and 57 mins and your part ships today!
$3.84

Tub Spring

This part is used to balance the tub during spin cycle. Sold individually. It is recommended that you replace all 3 at the same time.

Order within the next 1 hr and 57 mins and your part ships today!
$6.70

Tub Wear Pads - Package of 3

This package of pads contains three brown tub wear pads.

Order within the next 1 hr and 57 mins and your part ships today!
$2.70

Foot, Front - Single

Sold Individually.

Order within the next 1 hr and 57 mins and your part ships today!
$7.63

Leveling Spring

This spring is used on the leveling components in a washer. Please note, this spring may differ in appearance, but functions the same as original.

Order within the next 1 hr and 57 mins and your part ships today!
$2.98

Centerpost Gasket

Also known as Main Outer Tub Seal. This part helps to prevent leaking from the bottom of the tub.

Order within the next 1 hr and 57 mins and your part ships today!
$2.70

Hose Clamp

Order within the next 1 hr and 57 mins and your part ships today!
$2.70

Screw

This screw is sold individually.

Order within the next 1 hr and 57 mins and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Water pump leaking when machine used.

  • Customer: Tom from Granby MA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 449 of 469 people found this instruction helpful
The hardest part of this job was pulling the machine away from the wall so the hoses could be disconnected and the machine flipped onto it's back. Putting the machine on it's back does two things. It drains the water left in the bottom of the tub so it won't pour out onto the motor when the old pump is removed, and gives the necessary access to the pump. ... read more

Washer tub slammed into washer body during spin cycle

  • Customer: Brian from Seattle WA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 134 of 147 people found this instruction helpful
If you load a washing machine unevenly, it will spin out of balance. But our washer seemed to make noise during the spin cycle regardless of how the load was distributed. I suspected that the suspension or balancing springs were getting tired, and ordered a replacement set.

First I disconnected the washer from the water and power supply, then I la... read more

Water leaking on floor

  • Customer: Stanley from Warwick RI
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 72 of 78 people found this instruction helpful
I removed the two spring clips that hold the pump and two wire spring clips that hold the hoses. Then I had to pry the pump off the shaft (it was frozen with rust). Then I cleaned the shaft with sandpaper and installed the new pump (which, by the way, came the next day, thank you very much) which made my wife very happy, and I thank you for that , too. read more