Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
John M - May 10, 2021
Verified Purchase
Pretty tricky, but once waist deep it all worked out.
This was a pretty easy change out. I note the most tricky part was not damaging any of the many plastic clip attachments the manufacturer had cleverly hidden. I suppose this makes factory assembly easy, and it was for me once understood. The few screws that existed were easy to find.
So far, so good. We are back making ice, but not as new it seems....the refrigerator is 10 years old. I'll check the water supply next, but we went from zero to 85 mph instantly, with 100 mph being the goal. Regardless, I think a $203 part has bought us several more months and maybe years before we replace the entire unit.
Finding a service man that could fix it was impossible and I suspect the last one, who failed had broken some tabs already.
★★★★★
★★★★★
David N - June 21, 2019
Verified Purchase
not happy new part is doing same thing as old part
still broke
★★★★★
★★★★★
Ngon N - October 2, 2018
Verified Purchase
Fixed the problem soon I installed the part.
Part came in good condition, easy to install, quick delivery. Thank you so much.
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ken
September 27, 2017
How do i remove the box that holds the icemaker? I took off front cover and removed 1/4 screw on right side. Cannot pull box out? Can you help?
For model number GI7FVCXWY00
Hi Ken,
Thank you for your question. Generally you have to push a small flat head screw driver int the hole on the side cover that is on the left hand side of the cavity where your ice maker sits. You have to pop that cover off and then push down on the retaining tab at the left bottom edge of the ice maker to be able to pull that part out. I hope this helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Thomas
July 15, 2021
Ice maker isn't making very much ice and the motor that turns to put ice in glass doesn't turn and makes a hum for 2 seconds and stops what do I need?
For model number G17FVCXWA00
Hello Thomas, Thank you for the question. If the Ice Maker is not making enough Ice, you may have a water supply issue caused by a defective Valve. For the dispenser, it sounds like a defective Auger Motor. We hope this helps!
My ice maker overflows the ice tray and fills the entire ice maker cabinet with ice. Will replacing the ice maker assembly fix this problem? What causes the fridge to overflow the ice tray?
For model number MFT2771XEM0
Hello Andoni, Thank you for your inquiry. Water overflowing the ice tray is usually caused by the water inlet valve, or the ice maker pulling excess water from the water inlet valve. There are two water inlet valves for your model, the primary one, which supplies water to the ice maker, and the secondary valve at the back of the refrigerator, which controls the water supply coming into the refrigerator. We have included a link to our video on how to test the water inlet valve with a multimeter and test the ice maker. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Ice maker is making little to no ice and the ice cubes that are made are smaller than normal. Also lots of water (possibly condensation) on front cover left half of refrigerator. Does this sound like an issue with the ice maker itself or something else?
For model number gi7fvcxxy00
Hello Thomas, thank you for getting in touch. Based on the description that you have provided, we would recommend replacing the water inlet valve, part number PS11738654. We hope this solves your problem!
How do I remove this unit from the refrigerator? Mike
Hi Mike,
Thank you for your question. Here is a link to one of our videos on YouTube that you may reference on how to install an ice maker, https://www.youtube.com/watch?v=hmCE3oKpEk0. The refrigerator and the ice maker in the video may not show exactly like the ones you have, but it will give you a general idea on how to install the part. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
