Models > KFIL27CXMS1

KFIL27CXMS1 KitchenAid Refrigerator - Overview

Get Parts and Repair Help for KFIL27CXMS1

If you know the refrigerator repair part you need, you can browse the list of all parts on the KFIL27CXMS1, or you can search by name or part description. You can also find your part by where it is located on the KFIL27CXMS1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for KFIL27CXMS1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Light Bulb - 40W

Sold individually.


P-Trap Drain Tube Kit

Also known as a duck bill. This kit includes the tube extension piece and spacer.


Ice Bin Coupling

This part is located at the bottom of the ice bucket.


Water Filter Bypass Cap

This cap is used when bypassing the filter.


Light Switch

This part turns on the light when the door is opened.


Handle Mount

Sold Individually.


Kickplate Grille - Apollo Grey

This kickplate grille is attached to the bottom of the refrigerator.




Door Gasket - Apollo Grey

This door gasket is used to make an air-tight seal for the cabinet when the door is closed.


Thermostat with Clips

This part is also known as the cycling thermostat and this bi-metal device controls the activation of the icemaker ejection cycle.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

light on to order water filter

  • Customer: Douglas from Byron NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 585 of 618 people found this instruction helpful
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute. read more

Removing the existing filter by rotating as directed and then dislodging from 'docking' station proved difficult. Turns out, the old filter is under a bit of vacuum pressure and getting the unit to separate or release was a challenge.

  • Customer: Jake from Novato CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 190 of 280 people found this instruction helpful
I removed the drop-down outer housing by gently prying the sides of the two pivot pins at the rear. This gave me move 'room' to grip and slightly rotate then pull the old filter forward and away from the tight suction connection. I was concerned that I would be too forceful for the plastic assemblies and would break something; deliberate motions and a steady... read more

Needed to change water filter in refrigerator

  • Customer: Marilyn from Lilburn GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 130 of 208 people found this instruction helpful
The switch-out of the water filter was simple with good instructions on the box.
The part was delivered very, very quickly! read more