Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11744567
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
Not a problem, very simple once I got all the parts I needed...operator at partselect was very helpful and nice to talk to...Thanks for the extra cooking space
Help other customers find the most helpful instructions.
Were these instructions helpful?
Removed four screws; withdrew two burners; set two new burners in place; installed same old screws. That was it. When I turned them on to adjust the flame, they came on almost instantly and no adjustment was needed.Wife loves the nice new look.
I removed teh pans and great filter.I removed the screws from the older Rear and front burner assembly and use them on the new parts. It just took about 20 mins to do all 4 burners.Checked that the gas worked for all 4 burnes once assembled. Then replaced the pans and the grease filler.Results have been great as the gas burners ignite faster and the stove top looks brand new :-)
Simply removed the front burner using 1/4 incn nutdriver ontwo screws.placed new burner in position and tightenwd two screws.Simplest and easiest job I ever did! Works as new!
We've been wanting to replace these parts ever since we moved into our home. It was an amazingly easy process. The range looks like new. PartSelect was a great company to work with. You could track your product's mailing status easily online. One of the grates arrived with several scratches on it. When we contacted PartsSelect, they immediately sent us a new grate. We are very pleased with this company, and we will use them for future appliance parts needs.
Removed the two screws that hold burners on mounting bracket . Removed burners and installed new burners. re-adjusted air flow to elimenate yellow flame.
just removed two screws - took old unit out - put new unit in.
Removed two screws and replaced burners and placed the unit back into position and the burners worked perfectly. Very easy. I think anyone could do this task.
Took out a couple of screws and put in the new part. PartSelect was fast and efficient. Highly recommended.
Undid the bad part and installed the new one
just as stated before. Remove old burners from plate and reattach new burners.
I removed the old burners from the stove top. I then removed the screws holding the two burnes on to the mounting plate. Used WD-40 to loosen them up.I removed the old burners and put the new ones onto he plate then re-installed the burners on to the stove..............a cinch. Easy as pie, piece of cake.Thanks!
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.