Quick Question!

Have you ever purchased from PartSelect.com before?

11741734-1-S-Whirlpool-WP3412D025-09-Burner Head Cap with Spark Electrode
11741734-1-S-Whirlpool-WP3412D025-09-Burner Head Cap with Spark Electrode 11741734-2-S-Whirlpool-WP3412D025-09-Burner Head Cap with Spark Electrode http://www.partselect.com/Schematics/Maytag/50074.gif

Burner Head Cap with Spark Electrode

PartSelect Number PS11741734

This part distributes flame evenly to your cookware.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Compare At

$48.95

You Save

$8.16

Your Price

$40.79
Order within the next 9 hrs and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 14 reviews What's this?
1-14 of 14
 

27 of 39 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: paul from mc neal, AZ

Porcelan on igniter broken (2)

remove 2 screws that hold element in place, remove element, replace with new element, and replace screws , replaced burner assy on other

Help other customers find the most helpful instructions.

Were these instructions helpful?   

10 of 10 people found this instruction helpful

Parts Used:
  • Burner Head Cap with Spark Electrode
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools:
Customer: j from bridgewater, NJ

Sealed burner caps were rusted within and gas leak through the bottom of the caps

Just used a car oil filter band type wrench and rotated the sealed burner cap a 1/4 turn. cleaned up the rust and dirty. Replaced it with the new cap and tightened it with a 1/4 turn by hand. Instruction can be found on Maytag gas installation manual. The burners are working well and just like a new range.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

5 of 6 people found this instruction helpful

Parts Used:
  • Burner Head Cap with Spark Electrode
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Steven from Warwick, MA

Both burner heads would not ignite

Unplugged the burner heads from the wires, and simply put the wires on the new burner heads and put back onto the stove,. Simple as pie. Very happy that i found parts select online, easy to find the part though your pictures and easy to order.
Loved being able to do this myself without a middle man. Very satisfied!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 4 people found this instruction helpful

Parts Used:
  • Burner Head Cap with Spark Electrode
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Juan Jose from Miami, FL

Burners corroed by sulphate in the gas

just turn the burners counter clock wise with the help of a jar opener pad. unplug the wire connectors and replace the burners no hassle, no problem. Everything went fine… one thing though, it is not the same color as it was before. I didn’t realize it until opening the box. Previous color was grey. My wife is Ok with it, so I won’t complain, but maybe you should add the color option if there is more than one choice.

Best regards.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

5 of 8 people found this instruction helpful

Parts Used:
  • Burner Head Cap with Spark Electrode
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Nataly from Brooklyn, NY

One of four burners did not start (no sparks)

Turned burner about a quarter of a turn, lifted, disconnected wires, connected them to a new burner and replaced it.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 3 people found this instruction helpful

Parts Used:
  • Burner Head Cap with Spark Electrode
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Alberto from Houston, TX

Burners were rusted and rotten from the bottom, flames were coming from around the bottom

all i did was twist the burner counter-clockwise unplug 2 wires and installed the new ones, real easy, it took me about 7-8 minutes for the 4 burners, that was all, our stove is working like new now, albert

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 4 people found this instruction helpful

Parts Used:
  • Burner Head Cap with Spark Electrode
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: julie from harrodsburg, KY

The burner cap on my maytag gas range was rusty on the inside and didn't allow the cap to sit flush-causing gas and flames to leak from under the cap

installation was very simple and took less than 5 minutes. first unscrew the burner cap and then remove the 2 wires. to replace reconnect the 2 wires to the new cap and twist cap into place-simple.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 2 people found this instruction helpful

Parts Used:
  • Burner Head Cap with Spark Electrode
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: robert from tisbury, MA

Burner cap had rusted out

It was pretty much a plug it in job

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 3 people found this instruction helpful

Parts Used:
  • Burner Head Cap with Spark Electrode
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Donald from Appleton, ME

Burner heads were rusted out, releasing flames from underneath and also clogged with carbon dust

Very simple! Unscrewed the burner heads with a simple twist, unplugged the two wires from the old head, plugged them into the new one, then screwed that back in. The flames are MUCH better - more efficient and safe. thank you! ( Only issue was when we ordered we didn't see a choice of color and the new ones are different, but it really doesn't matter on an older stove anyway.)

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 6 people found this instruction helpful

Parts Used:
  • Burner Head Cap with Spark Electrode
Level of Difficulty: A Bit Difficult
Time to do repair: 15 - 30 mins
Tools: Wrench (Adjustable)
Customer: Jaime from Brooklyn, NY

Burner head were clogged with grease

First I removed the old burner head by twisting it counter clockwise by using wide channel lock pliers. When It completely came off, the burner head had deteriorated so much that it almost came apart. When I took off the 2 wires from the burner head it also easily came apart. The burner-head was in really bad condition. I cleaned the whole area and connected the 2 wires to the new burner head and hand tightened in a clokwise direcrtion. It took 20 minutes to install.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 3 people found this instruction helpful

Parts Used:
  • Burner Head Cap with Spark Electrode
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: John from Albuquerque, NM

One burner was sparking but not lighting

I first switched the old burner to a new position and different ignitor wiring. The problem persisted in both places, so I bought a new burner assembly and now the burner lights immediately. Very happy and a very simple replacement.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Burner Head Cap with Spark Electrode
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Tami from Yuma, AZ

Burners would not ignite.

I was looking at replacing the stove and saw the $1200.00 price tag! So I found this web site and paid $100.00 to fix my old one. It was very simple. I twisted off the old burners by sliding off the two connecting wires. Cleaned the area around the seating area of the burners. Hooked the wires on the new burners and twisted them back in place! Tested them to insure that was the problem and was done! Thank you for saving me $1100.00!!! Next I am getting grates so the whole stove will look band new!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 5 people found this instruction helpful

Parts Used:
  • Burner Head Cap with Spark Electrode
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers
Customer: MINH from DALLAS, TX

Smel gas when turn on stove .

Turn off power then turn to take old burner out ,
disconect 2 wire , .
Connect electric wire with new burner press in then turn and clock . Turn power on then start stove
and check .

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 3 people found this instruction helpful

Parts Used:
  • Burner Head Cap with Spark Electrode
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers
Customer: Roger from Mission, TX

Rusted out burner on stove top

turned burner counterclockwise and removed it reversed procedure and installed new one..

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-14 of 14