Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 8351VQ

8351VQ Magic Chef Cooktop - Overview

Get Parts and Repair Help for 8351VQ

If you know the cooktop repair part you need, you can browse the list of all parts on the 8351VQ, or you can search by name or part description. You can also find your part by where it is located on the 8351VQ by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. We’ve also included any installation videos we have for 8351VQ parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the 8351VQ

[Viewing 3 of 3]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$16.43

Top Burner Igniter

This top burner igniter comes with a mounting bracket.

$100.06

Spark Module

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

$4.94

SCREW

Sold individually.

$111.15

Pressure Regulator

A pressure regulator is a valve that will cut off the flow of liquid or gas when it reaches a certain pressure.

$40.47

SWITCH- IG

$45.37

IGNITER SW

$4.94

SCREW

Part might differ in appearance, but functions same as original. Sold individually.

COVER- BUR

KNOB- BURN

TAPE- FOAM

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

gas burner ignitor failure

  • Customer: roy from East Providence, RI
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 97 of 110 people found this instruction helpful
Lift out sealed burner assembly rear of stove first while careully sliding to rear to disengage ignitor probes.Remove philips head screws from bottom sheet metal housing to expose bottom of burners Remove gas tube assembly screws and move tube away carefully.Unplug wires from ignitor.Remove screws for ignitor .Remove ignitor, I noticed that rust and dirt ha... read more

top burners on stove won't ignite ,no clicking noise

  • Customer: scott from centreville, VA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 36 of 52 people found this instruction helpful
remove small panel on right side of stove,then un clip moduke and put wires from old module to new one.
Exact fit nomproblems. read more

porcelan on igniter broken (2)

  • Customer: paul from mc neal, AZ
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 26 of 38 people found this instruction helpful
remove 2 screws that hold element in place, remove element, replace with new element, and replace screws , replaced burner assy on other read more