Quick Question!

Have you ever purchased from PartSelect.com before?

11741237-1-S-Whirlpool-WP3363003-Upper Agitator
11741237-1-S-Whirlpool-WP3363003-Upper Agitator 11741237-2-S-Whirlpool-WP3363003-Upper Agitator 11741237-3-S-Whirlpool-WP3363003-Upper Agitator http://www.partselect.com/Schematics/Maytag/PDHO1WNZ.gif

Upper Agitator

PartSelect Number PS11741237

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will not agitate.
  • Noisy.

Compare At

$67.84

You Save

$11.31

Your Price

$56.53
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.0 / 5.0, 11 reviews What's this?
1-11 of 11
 

139 of 158 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Socket set
Customer: Michael from Claremont, CA

Top part of agitator (auger) was not turning

Using kit 285587 was straight forward. Removed fabric softener dispenser & sealing cap. It took more time to find the socket set (needed a 7/16 socket) with a long driver (10 inch) than to unscrew & remove the auger & agitator.
Cleaned up the bowl whilst it was apart (good buildup of junk under the agitator). Replaced agitator, new thrust washer to find that grease should be applied but isn't included in kit (get part not 350849). Grrr.... Applied new auger, cam, dogs and holder. (No instructions in kit for assembling cam, dogs & holder, but you can work it out ok). Applied new bolt & washer, new seal on cap. Installed fabric softener. Could have been a 15 minute job but peace and quiet in the garage makes it worthy of taking longer ;-)

Help other customers find the most helpful instructions.

Were these instructions helpful?   

8 of 8 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Socket set
Customer: Randy from Des Moines, IA

Agitator stopped spinning, so clothes weren't getting clean.

First I removed the liquid fabric softener cover, then removed the seal with my fingers, then used a socket with an extension to remove the single bolt that holds the agitator to the spindle.

Next, I pulled up to remove the agitator and tipped it upside down to take out the centrifugal mechanism. Then, I simply replaced the old parts with the new ones, and put it back together, as it shows in the included diagram. It took about fifteen minutes.

I was glad to be able to go online, and quickly locate the exact parts our machine needed, at a reasonable price! Our machine now works like new again.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 4 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver
Customer: marty from newalla, OK

Wash cycles worked normal but agitator would not rotate clothes

I ordered my parts from partselect and had them at my door the following day (AWESOME!) I removed the dispensor on the top of the agitator and reached inside to remove the protective cover to the cams/bearing area. I then removed the center bolt (7/16) and lifted the agitator off the shaft. Replaced the parts I ordered (Part Number: PS334650
Agitator repair kit, and replaced the Upper Agitator Part Number: PS342399) Everything fit perfectly and the instructions were quite simple. Washer now works like a charm and I didn't have to replace my washer. I was very impressed and surprised with the delivery time of my order. I will definitely use this website again for any appliance repairs I need. MrL 11/2010

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Socket set
Customer: Wayne from Graham, NC

Upper agitator not working.

Follow inst. that came with the parts. Took out the old and replace with the new one's. Took about 30 mins. all total. Web site was real good on showing which parts that I needed and order department was great.

Wayne Tulloch

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Socket set
Customer: Marvin from Lake City, MN

Top agitator cam arms worm

Removed the agitator and seperated the top unit notice the cam arm were worn, order the parts on line Sunday After noon and recieved the parts the next week! Great service very easy I did call customer Service checking on delivery spoke Steve who was very helpful.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 5 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Socket set
Customer: HENRY from GRIMESLAND, NC

Cams on cloths mover where stripped

removed the old parts and replaced with new ones it was simple parts were a perfect fit

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Socket set
Customer: Adele from Glenrock, WY

Agitator didn't move the clothes

Pop off the softener dispenser. Use a socket with a long extension to remove the bolt inside agitator. Important - save the old parts so you can assemble the new agitator kit! Put it back together and tighten the bolt.
I fixed it myself and saved $150 trip charge for a repairman! Thank you!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Socket set
Customer: James from Hobbs, NM

The agitator was badly worn

pulled the softner dispenser, removed the o-ring seal cap, pulled removed the assembly bolt, removed the agitator rotator assembly, replaced worn componants with new while reversing the process.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

17 of 351 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers, Wrench set
Customer: Ernie from Beaumont, TX

The teeth on the one-way clutch of the upper part of the agitator were stripped.

The directions that came with the parts were very helpful.

1. Removed the softener dispenser.
2. Removed the bolt at the bottom of the exposed agitator.
3. Pulled up the agitator assembly.
4. Installed new parts.
5. Reversed process.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

18 of 531 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Socket set
Customer: Daniel from Naples, FL

Upper agitator not rotating.

Removed the degergent cone. Removed the cap with handle and o ring. Removed 1/2 bolt and washer with deepsocket and extention. Removed upper agitator and gear wheel and replaced pieces with new repair kit.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

28 of 703 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools:
Customer: Raymond from Speedwell, TN

Cam dogs worn out and the agitator wouldn't rotate.

Removed softner dispenser on top of agitator. Removed next was cap and seal cover at base of the agitator by just pulling it up. Used 1/4" drive w/ 7/16" socket w/long extension to remove the agitator mounting bolt. While holding the bottom of the auger, pull the agitator up, removing the top agitator assembly. Replace the necessary worn parts. Read the directions which came with your ordered parts. Also, the agitator grease which you are to use to lube the top of the Thrust washer is not included in the repair kit. You can use non water soluable grease to lube the thrust washer or order part number 350849. Total time, 15 minutes. Happy washing...

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-11 of 11