Models > ZBD6880N20SS > Parts

ZBD6880N20SS General Electric Dishwasher - Parts

All parts for the General Electric Dishwasher ZBD6880N20SS

Below is a list of all parts for the General Electric Dishwasher ZBD6880N20SS. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the ZBD6880N20SS
1-14 of 131
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Single Wheel Axle

This axle attaches the dishwasher wheel to the rack. Wheel is not included. Sold individually.


Silverware Basket

This is a basket for washing flatware or silverware in your dishwasher.


Detergent Dispenser with Rinse Cap

This part releases the detergent and rinse aid into the dishwasher.


Upper Rack End Cap

This end cap is sold individually. It is the same end cap used on the right and left side, for both front and back. It attaches to the end of the upper rack slide rail, and prevents the rack from falling when being pulled out too far.


Water Inlet Valve

This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoid on the valve open and close according to the de...


Lower Dishrack with Wheels

This dishrack includes the wheels.


Screw 8-16 hxw 1/2 ss

Sold Individually.


Rinse Aid Cap

This part holds the rinse aid liquid in the dispenser until the timer activates the rinse cycle.


Tub Gasket

This gasket lines the inside cabinet in the dishwasher.


Tine Retainer

This dishwasher retainer connects to the removable tine.


Cage Roller Bearing Assembly

Aides with movement or sliding of the dishrack.


Hinge Arm Link



This works in conjunction with the pump and filtration system. It is used to receive drainage for disposal.



All Parts for the ZBD6880N20SS
1-14 of 131