Quick Question!

Have you ever purchased from PartSelect.com before?

Models > ZBD6880N20SS

ZBD6880N20SS General Electric Dishwasher - Overview

Get Parts and Repair Help for ZBD6880N20SS

If you know the dishwasher repair part you need, you can browse the list of all parts on the ZBD6880N20SS, or you can search by name or part description. You can also find your part by where it is located on the ZBD6880N20SS by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for ZBD6880N20SS parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$21.74

Dishrack Rollers and Axles - Kit of 8

If you are having trouble rolling your dishrack in and out, there could be an issue with the rollers or axles. Check the existing rollers and axles for any visible physical damage....

$18.68

Silverware Basket

This is a basket for washing flatware or silverware in your dishwasher.

$20.36

Water Inlet Valve

This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoid on the valve open and close according to the de...

$47.04

Detergent Dispenser with Rinse Cap

This detergent dispenser assembly is attached to the inner door panel of a dishwasher. This part holds detergent and dishwasher rinse products in a covered container. If your dispenser will not open, close, dispense detergent properly, or the dishes are coming out of the dishwasher dirty, replacing this part can solve these problems. The tools needed for this installation project are a #2 Phillips screwdriver and needle-nose pliers. To repair, first remove screws from the bottom of the inner door panel. Next, remove connecters, wires, and screws from the dispenser to access it and replace with new dispenser. Refer to the manual provided by the manufacturer for further installation instructions and guidance. Unplug dishwasher from power source as a safety precaution.

$157.12

Lower Dishrack with Wheels

This dishrack includes the wheels.

$3.76

Upper Rack End Cap

This end cap is sold individually. It is the same end cap used on the right and left side, for both front and back. It attaches to the end of the upper rack slide rail, and prevents the rack from falling when being pulled out too far.

$24.60

Tub Gasket

This gasket lines the inside cabinet in the dishwasher.

$4.73

Rinse Aid Cap

This part holds the rinse aid liquid in the dispenser until the timer activates the rinse cycle.

$4.31

Hinge Arm Link

$22.39

Sump

This works in conjunction with the pump and filtration system. It is used to receive drainage for disposal.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Lower wheel axles worn out

  • Customer: Glen from Alpine, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 946 of 481 people found this instruction helpful
Simple repair... Great Company, quick shipping (in CA had it the next day). Quality parts, GE OEM!! And to top it off the lowest prices!! read more

My wheels would not stay on the roller rack which made me dread having to put a dish in the rack.

  • Customer: Michelle from Weddington, NC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 740 of 374 people found this instruction helpful
All I had to do is take out the rack, pop off the old wheels, place the new stud rollers on, then pop on the new wheels. So easy and now my dishes don't get chipped when I pull the rack out and push it back in. I wish I didn't wait so long to order new parts. read more

Lower rack began rusting and wheels broke off.

  • Customer: nathan from commerce, MI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 468 of 222 people found this instruction helpful
Pull old rack out, slip new one in!
One thing i did was order wheels and studs as i was unaware they lower rack came fully equiped with all wheels,studs, and flip up dish dividers. So if your replacing the rack no need to order the wheels! The diagram made it look as if you only et the wire rack and not all the added pieces. read more