Models > YMED6400TB0

YMED6400TB0 Maytag Dryer - Overview

Parts and Repair Help for models starting with YMED6400TB0

If you know the dryer repair part you need, you can browse the list of all parts for models starting with YMED6400TB0, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dryer. We’ve also included any installation videos we have for YMED6400TB0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Models starting with YMED6400TB0

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$11.11

Thermal Fuse

This part is a one-time use thermal fuse which attaches to the blower wheel housing of your clothes dryer. It cannot be re-set and must be replaced when continuity between the pins...

Order within the next 9 hrs and your part ships today!
$33.43

Maintenance Kit

NOTE: This kit is for 29" wide dryers built 1965 or later. Please verify model # before ordering as may not work for all models. This kit comes with one multi-rib belt, two drum support rollers, one idler pulley, four tri-rings, and one clip. This part can be used with both gas and electric dryers.

Order within the next 9 hrs and your part ships today!
$3.69

Door Catch

This part helps to keep the door closed when the machine is in use.

Order within the next 9 hrs and your part ships today!
$10.71

Drum Support Roller

Sold Individually. Most dryers require 2. Tri-rings sold separately.

Order within the next 9 hrs and your part ships today!
$20.21

Internal-Bias Thermistor

Part may differ in appearance, but functions the same as original part. This part controls the temperature of the inside of the dryer drum and prevents the dryer from overheating.

Order within the next 9 hrs and your part ships today!
$4.54

Heating Element Connection Wire Kit

This kit is used for electric clothes dryers, and it comes with a yellow wire nut.

Order within the next 9 hrs and your part ships today!
$3.54

Leveling Foot

Sold individually.

Order within the next 9 hrs and your part ships today!
$5.62

Tri Ring

Sold individually.

Order within the next 9 hrs and your part ships today!
$36.73

Lint Filter

Also known as Lint Screen. Handle is white in color.

Order within the next 9 hrs and your part ships today!
$8.95

Light Bulb - 10W

This 10 watt light bulb is used with both washers and dryers. Sold individually.

Order within the next 9 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Dryer was working, but no heat.

  • Customer: ANTHONY from CHESHIRE CT
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 1316 of 1507 people found this instruction helpful
First I unplugged the dryer, then removed the back panel, this exposed most all of the wiring and I could see the heater coils.
Not knowing what the problem was I started looking at the coils and could not see any broken parts.
So then checked the thermal fuse for continuity I removed the two wires from it with a small pair of needle nose pliers, ... read more

No heat but would run otherwise

  • Customer: Dana from Grassvally CA
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Screw drivers
  • 529 of 544 people found this instruction helpful
Cleaning the lint out of the whole machine took quite a bit of time--it was everywhere. Underneath the lint trap was a collection that ultimately ruined the thermal fuse where it restricted the air flow considerably.

Ascertaining the problem was the most time consuming part.

The actual repair was quite simple and didn't take but 15-20 m... read more

Broken drive belt

  • Customer: DENNIS from ALTOONA FL
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Screw drivers
  • 159 of 176 people found this instruction helpful
Grow a second set of hands. Always unplug any appliance. Remove lint screen. remove two screws (philips Head). I took a wooden shim lightly tapped w/hammer to pop front of dryer top free. Mine worked on hinges and just flipped back til it rested against the wall. Removed two 5/16 screws inside holding face on carefully raise face section off the support clip... read more