XGHS2645KF1 Frigidaire Refrigerator - Instructions

I replaced the defrost timer,defrost thermostat,and run cap.as it turned out the compressor went bad. I dont know the model because but the time I got this review I replaced the refer with a knew one . two weeks living out of coolers was so much fun !!!!!!!!

Simple installation - just pop into place! We thought they were a bit overpriced, but we certainly can't complain about the service - EXCELLENT!

Followed the instructions from another person in the Part Select water valve section and from the video on the same page. Excellent instructions and very easy installation. Water dispenser and ice maker began performing properly as soon as the refrigerator was plugged back in to the power.

We decided to get a new fridge, after the " sticker shock " of new refrigerators we decided to repair the one we have. Two screws and one plug and the ice maker was replaced, took out the broken crisper shelf, put in the new one and that was done, instructions were great. I actually had to watch a " how to " video, ( provided by your web site ) to change the shelf support, very easy. thanks, Gary Hoyle

after watching the video I followed to the tee used the screw driver tapped out the old peg and removed the stem in minutes I was tapping in the new parts

If this happens to you the first thing I would do is shut off the freezer and, using a hair dryer, melt the ice in the ice maker and heat up the water inlet to make sure it is not froze up. Turn the freezer back on and wait to see if that cures the problem. If not, order the new water inlet valve and follow the simple instructions in the video provided on the PartSelect website. I have never have a more pleasant experience with any parts/repair service than I did with PartSelect. After ordering that part it came within the time they stated and their help with the install was great. Also helpful were the other customers talking about their problems and solutions.Thanks to PartSelect I now have Ice and a happy wife. Happy wife--happy life.

The bins don't easily snap into place, you have to twist them a little to make them fit into the support nubs. The trick is not to twist them too far or they'll split.Ours do, and now we store half-gallon OJ and milk back where the containers belong.

The new inlet valve came with pisco connectors so had to cut the end of the tubes off. Before doing this I marked all the tubes to make sure they were replaced in the correct order. The pisco connectors are great to use and very quick. The total install time was about 20 to 30 minutes. While you have the back of the frig off make sure you vaccuum the fan and coils. It was making ice in less than 20 minutes.

Removes broken bin and installed the new one. No tools needed. Very easy.

per the video..easy installation....unfortunately the temperature did not improve. We still have a refrigerator temp in the upper freezer.....and a "cooler" in the refrigerator section

One screw taken off, part pops out, pop in new part, replace screw ! Done.

watched the youtube video from PartsSelect and was able to remove old water inlet valve easily and install new one with little effort. The hoses on my refrigerator were a bit different than shown in video, but I was able to modify them and it's working just fine now. Thank you PartsSelect !

We needed to first select the correct part number. The diagram furnished at the website was sketchy and incomplete, but thanks to the helpful assistance of your patient customer service rep I was able to correctly identify and place the order for the correct part numbers. Each item arrived in lest than 48 hours using standard shipping charges [5-7 business days] much to my surprise. Disassembly and reassembly was very basic. It took longer to remove the food from the refrigerator shelf and pulling out the drawer than it did to unscrew the part and reassemble it hanging it back on the refrigerator brackets. In all it took less than 15 minutes including the removal and restocking the food back onto the refrigerator shelf. While I am not one to brag about repairing anything mechanical I must admit that this was a real morale boosting operation. Anybody with a screwdriver that is tall enough to reach the shelf and shelf brackets could repair these items. It almost took just as long to fill write this narrative as it did to do the repair. Thanks to the Customer Service Rep, she was very kind and reassuring.

I called the contract repairman recommended by Frigidaire and he came to my home. He told me that the ice container had to be put in a certain way until it locks into position. When he left after telling me it was now fixed, it still didn't work and the auger squealed when activated. I decided to find out why it squealed and found that the back end of the ice maker was cracked and the auger was bound up. I couldn't even turn it with both hands. I got on the internet and was lucky enough to stumble onto PartSelect.com. They showed an Ice Maker Assembly so I ordered it. When it came in I opened the package with my fingers and a knife and shoved it into place. Oh . . . I also snapped it into place where it locked. I guess the repairman knew what he was talking about. . . NOT! It now works great. I love the internet. Errol

The new bin I ordered was delivered in one day.I was very impressed. The part just slid right on the door.No tools. Very easy. I'm very pleased.