Models > WWEF3002KWB

WWEF3002KWB Westinghouse Range - Overview

Get Parts and Repair Help for WWEF3002KWB

If you know the range repair part you need, you can browse the list of all parts on the WWEF3002KWB, or you can search by name or part description. You can also find your part by where it is located on the WWEF3002KWB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for WWEF3002KWB parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$29.16

Bake Element - Push On Terminals - 240V

This bake element is found on the bottom of the oven.

$3.51

Front Drawer Glide

Sold individually.

$3.96

Rear Drawer Glide

Sold individually.

$3.51

Drip Bowl - 8"

$3.51

Chrome Drip Bowl - 6"

Sold individually.

$5.99

Terminal Block Kit

This surface burner terminal block kit comes with interchangeable mounting brackets, ceramic wire nuts, heat shrink protective tubing and wires.

$21.41

Infinite Burner Switch - 8" - 240V

$18.96

Surface Element - 8" - 220V

4 Turn.

$18.68

Surface Element - 6"

$8.08

ANTI TIP KIT

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven woudn't heat

  • Customer: David from Shawnee KS
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 484 of 489 people found this instruction helpful
1. Removed two screws, pulled out the element, voltage tested the element and determined it was an open circuit (bad element).
2. Ordered the part from partselect.com
3. Disconnected element, connected the new one, and screwed it back in. read more

Element cracked in two pieces

  • Customer: Michael from Green Bay WI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 506 of 592 people found this instruction helpful
Shut off circuit breaker to stove and collected the tool from the basement. Turned on flashlight. Unscrewed the two hex nuts from the old element/back of the oven. Slid the old element prongs out of the back, exposing the connecting wires. Pulled the connecting wires off of the old element, carefully, so that the connections wouldn't come off of the w... read more

Front slide of bottom drawer broke off.

  • Customer: Jeanette from Alpharetta GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 459 of 460 people found this instruction helpful
Inserted new slide as directed by video. Very easy and video was very helpful. read more