Models > WRT18G4AW4 > Instructions

WRT18G4AW4 Westinghouse Refrigerator - Instructions

All Instructions for the WRT18G4AW4
361 - 375 of 520
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
trim piece on shelf was broken
Just had to slide new part on to the back of glass shelf.
Parts Used:
Shelf Trim - Rear
  • Sherrye from Trezevant, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Freezer door sagging due to warped hinge
Just block the door up so it doesn't fall off, remove the two screws, replace hinge, and replace screws. My wife could have done it. Metal replacement part is much better than the original plastic that warped from day one.
Parts Used:
Upper Hinge
  • Keith from Springfield, OR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
no defrost +warm frig
watched vido on your site
Parts Used:
Defrost Thermostat Defrost Timer - 60Hz 120V
  • Don from Holyoke, MA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
door handle broken
Unscrew the attached broken piece from the refrigerator (two screws). line up the new door handle with the existing screw holes and attach. Simple.
Parts Used:
Door Handle
  • nelson from ville Platte, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Support rail broke
I took the shelf out and took part off and replaced the new one.
Parts Used:
Drawer Support Rail - Right Side
  • Donna from Olive Hill, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
broken rail
Remove the shelf. Removed one screw. Removed old part and inst. new part with the one screw. Reistalled self.
Parts Used:
Drawer Support Rail - Left Side
  • Donald from Kaw City, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
changed defrost timer
followed the video very esay
Parts Used:
Defrost Timer - 60Hz 120V
  • Gerry from Apache Jct, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
The freezer door shelf retainer had snapped and broke at the plastic ends.
I ordered the plastic end pieces and the metal strap they connect to as outlined by the PartSelect website.... The metal strap they sent was too long and I couldn't cut it to fit. I did realize, however that there was nothing wrong with that part so I attached the end pieces to the old middle piece and it worked out just fine. I now have an extra part that I didn't need after all though.
Parts Used:
Refrigerator Door Shelf Retainer Bar - Cut to Fit Door Shelf Retainer Bar End Cap - Right Side Door Shelf Retainer Bar End Cap - Left Side
  • Bab from Mulberry, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Our refrigerator was not cooling below 50 degrees but the freezer had no problems. Turns out that the evaporator fan motor was dead.
I followed the instructions in the video associated with the part that I ordered. The video was perfect and described everything I needed to do clearly. Repair is 100% successful!
Parts Used:
Evaporator Fan Motor Kit - 120V 60Hz
  • Charles from Annandale, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
broken rail support
Removed the screw at back of broken rail. Removed the broken rail, replaced with the new rail, replaced the screw. Total repair time, 5 minutes. Took longer to clean the shelf off than to replace support rail
Parts Used:
Drawer Support Rail - Right Side
  • James from Lincoln, AR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Left side rail of meat draw broken
I removed the rack from the refrigerator. Then I used a Phillips screwdriver to remove screw from old part then screwed the on the new part to the rack.
Parts Used:
Drawer Support Rail - Left Side
  • Derek from Brooklyn, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Freezer cold and frig warm
Replaced evap motor. Everything is strong and running like a champ. Partselect video examples were very helpful. Would order parts again on next problem. Thanks
Parts Used:
Defrost Thermostat
  • William from Miami, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
Was this instruction helpful to you?
Thank you for voting!
Support rail for meat drawer broke (again).
Took out the shelf, removed the rest of the broken rail, replaced it. Piece of cake. (Note: The meat drawer support rails on this otherwise good refrigerator are very flimsy and break with some regularity even when the meat drawer isn't heavily filled. A good idea to keep spare support rails at home.)
Parts Used:
Drawer Support Rail - Right Side
  • Peter from San Antonio, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
fridge side was getting warm.
open freezer door two screws just below unscrew slide piece to side unplug reinstall very simple.
Parts Used:
Defrost Timer - 60Hz 120V
  • Darryl from Russellville, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Both gaskets were not sealing.
Called handyman and provided him with the parts. He took less than an hour,.
Parts Used:
Refrigerator Door Gasket Freezer Door Gasket
  • R. Evans from Las Vegas, NV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the WRT18G4AW4
361 - 375 of 520
Back to Top