WRT15MG5CS7 Westinghouse Refrigerator - Instructions

Snapped new door rack into place.

We simply replaced the door rack. It was extremely easy with the quick delivery of the product!

first I replaced the timer control hoping thats the problem,unfortunately situation the same ice build up on the freezer.so I replaced the defrost thermostat.right now I'll still observing the condition if still the same.may be in couple days.so far its good.and to replace the parts is not difficult and easy.

Disassembled shelf and drawer to find broken rail. Found parts number on website's "exploded" parts view. Reassembled with new part and drove one screw to secure. FORTUNATELY I kept old broken part which had special screw needed to reassemble. I would have expected replacement part to include its attachment screw, but it did not.

After removing the drawer from refrigerator I fixed it on the kitchen counter in less than 15 minutes.

Replaced the ptc starter switch. Fied the problem and she's running fine.

Took all the item off the shelf turned it upside down on the table,worked rear off off the pin carefully,install new rail and refastened the front tab strip.

My sisters and mother were going to call the repairman. I looked at it and thought I could easily repair it. I ordered the part. Just like all the reviews said it took longer to clear off the shelf and take it out of the fridge than it took to repair it. I figure only call for service when it is something you really cannot repair. Thanks!!!

I literally just watched the video while I was repairing it at home. This is coming from a very girly girl who was desperate because she did not want to spend money on a new fridge while risking everything to fix it. If I can fix it...anybody can do it! I didn't even use the fancy melting machine, I used regular old wire tape and it is as good as new!

Took out the top shelf, unscrewed the slider, screwed in the new slider and that was it! Very easy and fast service.

Unplugged the frig. Removed temp control module from frig, 1 screw with nut driver. Activated defrost timer by rotating adjustment until 2 clicks are heard. Removed two timer mounting screws, unpluged timer, plugged in the new timer, mounted it to the control module with 2 mounting screws. Replaced control module with the 1 mounting screw. Closed door and plugged it up.

This repair on this model is super easy because the shroud for the fan is not really attached except for the bottom so I was able to gently bend it to give em enough space to pull the broken fan off and put the new one on.

I watched the step-by-step installation video and followed the instructions therein.

pulled down the thermostat cover and unpluged the timer control and replaced it with the new part. total time to repair was about 15 min. there was a vidio on how to replace the new part that just informed me that I did it right!!!!very easy site to find what you are looking for!!!!