WRS6R3EW0 Westinghouse Refrigerator - Instructions

loosened two 1/4 in. screws removed ice maker unplugged harness. Plugged back in slid the replacement ice maker over the two screws secured. Done

It was so easy the light socket came right out took out old undid clips (light was melted to socket)put new socket piece in reattached clips...light works...as far as the door not closing...unscrewed on screw took off plastic clip put it in and put the hinge bearing on top...put refrigerator door back on...first top then squeeze bottom on...I bet I saved over $150.00 dollars if I called a repair man for a 15 minute job...your website made the job alot easier discribing what the problem was and parts need...easy to follow....thank you

All instructions included on this site are good. I would add only one thing to them. When removing the 4 water lines from the old unit be sure to pull up on the white rings while you pull down on the water lines. All else is a snap.

I removed the top hinge cover, loosened the hinge so I could remove the door and laid the door on it's side. I removed what was left of the Door Closing Bearing and istalled the new parts. Set the bottom of the door on the lower hinge then postioned and set the top hinge into place and tightened the top hinge and installed the hinge cap.

removed cover from top hinge,then hinge r&r bottom cam plate reinstalled door. now no noise opening door,ice naker is very simple turned water off to frig loosened two screws and unpluged wiring.harness is a little long. took a while to make ice next morning it was working fine

i was trying to figure it out but eventually it fix it self even when i get the part the problem seems to be fix on its own i unpplug the eletrical cord from the wall for over three hours and plugged back in and after 2 more hours it works so i am confussed dont know what happen i did not change any part so i have one brand new inlet water

This was a simple repair, just pop the bins in the molded spots. I would like to comment that the bins are flimsy and this is the second time I have had to replace them in less than 4 years. They break very easily so do not overload them.

It was simple... After paying $280 for a repair man to come out and install some unnecessary part to the fridge when I told him "everything on the Internet points to a thermostat repair." He disagreed, fixed the fridge and said the freezer would work more efficiently now. It didn't, so I bought a new fridge/freezer, put the old one in the basement. I ordered the thermostat (under $20), put it in, and now (knock on wood), works great and I have a beer fridge for the man cave

Very very easy just slip replacement bins back into place. We did receive our order the very next day after ordering, so the parts ordered came very quickly... so thanks for that. Just hope these last longer than the originals did.

I followed the instructions on the Video and it was very helpful and I completed the job in 15 minutes. Greatest web site for helping with repairs. I would certainly reccommend this web site to anyone that would perform their own repairs

Easily installed the new ice-maker. Rec'd the part in three days.

Ordered the replacement bin> It arrived the next day. Tool 3 seconds to pt it in place and all is back to normal. Good service.

The replacement was simple, only two screws and the electrical plug. The problem was the location of the two screws that were impossible to see directly and difficult to access with a screw driver.

This repair on this model is super easy because the shroud for the fan is not really attached except for the bottom so I was able to gently bend it to give em enough space to pull the broken fan off and put the new one on.

I watched the step-by-step installation video and followed the instructions therein.