WRS3R3EW2 Westinghouse Refrigerator - Instructions

Removed the door, removed the broken part, inserted new part, used vaseline on all exposed parts and put door back on (better than new)!

Replacing the tray was easy once I received the correct tray. It seems the part number on the tray had been changed over the years since I had purchased the refrigerator. By ordering the part from just the catalog, I had no idea I was ordering the wrong part. When I received the part, I called and the representative who I spoke with told me of the problem and with the serial number the correct part was ordered...good Customer Service.

It was a piece of cake took mins Thanks ps for those who are not mechanical they even have videos to show you how to make the repair

I watched the do it yourself video which helped tremendously. My husband was busy so I was able to do it myself.

Replaced canister

I changed the valve but still no ice, changed the filter also. think it was just froze. could have saved me 70 bucks

Purchased a replacement part only to find the new part had push on fitting and my part has screw on fittings. Went to Youtube where Partselect had a video on how to replace the part from screw fittings to push on fittings

Easily done. Great fit.

Had my 3 year old remove the 4 screws to holds the carboard in place. Pryde the old fan blade off with a screwdriver. slid the new fan blade on to the shaft then my 3 year old put the screws back in.

took old valve off one peice of it was broke off from freeze replaced it with new valve all but one conection was quick connect electric connections were color coded quick fix works fine thanks Gary

I removed the back panel ,cardboard-three screws,pushed the old fan blade off the motor and pushed the new fan on.Extremely easy.

Not long after we bought this fridge, the plastic on the light switch cracked, making the lever stick out too much so that the door wouldn't close. It's been taped down ever since. I simply pulled the old switch out and plugged the new one in. I'm kicking myself that I didn't do this ages ago. It was so easy and now I can see inside my refrigerator again.

The changing of the water valve was pretty straight forward. First shut the water off to the ice maker, then pull the refrigerator out. Once that is done, then I removed the cardboard covering with a cordless drill, loosened the screws that held the water valve in place. The water valve assembly is colored coordinated so disconnecting and reconnecting the lines to the new valve assembly was pretty easy. Reattached the cardboard covering pushed refrigerator back and place turn on supply line and waited for the ice maker to fill up. After several cycles on the ice maker I made one slight adjustment on the ice cube size behind the cover of the ice maker. Total time one hour, then waiting for the ice maker to cycle a few times to ensure all was working properly.

Just took old knob out put new knob in real easy thank you jd

Took front off and found the broken spring, got new one and replaced, now works great. Make sure to unplug as the water can come on and flood the freezer.