WRS26MF5AWQ Crosley Refrigerator - Instructions

i dissasamble the water & ice dispenser and substitued the ribbon cable for the new one.

Pushed the bins in place,very easy.

Put in the new one!

Crusher housing had broken so I ordered the part and replaced it. I have since put it back together twice. When I first installed it it crushed the ice no problem. From that point on it seems to lock up and won't crush the ice, cube ice works but the blades seems to hang up after the first use. I can turn the cog by hand but I have to turn it backwards a few times before it turns freely, however it still won't crush the ice. I took it apart and put it back together again. Same thing happened after the first time I tried it. Can you help me. The old crusher broke into. Could something else be locking up?Thanks for the help

Very simple, pulled out the old ice reservoir which contains the feed ice crusher & blade attatched to the shaft. Emptied the old ice tray instaalled thre new tray (after washing & drying) & put it place make sure the motor drive meshed with the new shaft drive. Lowered the ice detector arm & away it went. Probably took 10-15 minutes. I tried to fix the old one twice & spent maybe 3-4 hrs but the repairs never lasted very long.

Replaced the broken bin

Went relitively easy. Simple to take apart. Ordered another ribbon too, figured while I was in there if I messed it up atleast I would have another. Had to use a long thin screwdriver to guide the water hose back on. Would like to see parts come with a diagram though.

snapped the wires from frig onto the proper prong and viola,it works. The proper prong is identified by the size because there are two prongs with the wires and two connecting prongs in the socket. I talked to a very helpful representative and she gave me the number for Frigidaire, when I was confused by the placement of the wire. Wish I had remembered her name to share with you. As it turned out I didn't need to call Frigidaire.

Installed the bins on the doors,no tools req.

By removing the old water filter and installing the new one

Just popped it in..didn't fit really well...had to force it some what which I didn't like but same drawer. Good to go.

Replaced bin in door. Noi tools needed

Took out two screws, installed new parts, put screws back in. Done.

Installed new valve.There are several pieces of tubing coming off of the valve. Pay close attention to where they go. Color coordination is poor on the new valve.

I watched your video on how to do the procedure and followed it, step-by-step. It worked like a charm. When I took the crisper drawer and runner out of the refrigerator, I noticed that the lower drawer support had broken as well. So, I have ordered 4 to have a few on hand and will repeat the process when my new order arrives. I'm very pleased! Thank you very much.