WRS26MF5AWE Westinghouse Refrigerator - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
was not making ice
took the back off refridgerator, disconnected water valve assembly, then disconnected water lines and electrcal connectors. also i received the part in less than 24 hours
Parts Used:
-
john from glen ellyn, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Socket set
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My water dispenser actuator broke.
I unplugged the refrigerator. I then removed the two screws that hold the element in place. I then removed 3 screws. After that, I removed 3 screws that were holding the dispenser in place. I took out the old part and put in the new. I then put back all of the screws.
Parts Used:
-
ANDREW from MOLINE, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken shelf support
Punch out center of old support, then pull it out. Insert new suppport, insert center and tap flat with hammer. All done!
Parts Used:
-
Karl from Manchester, NH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
It's a mystery but grandson broke the shelf bin
Took the part out of the package and snapped the part onto the refrigerator door.....did not even break a sweat.....
Parts Used:
-
Linda from Bryan, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drawer support was broke
Pried the broken support insert out with a screw driver and pulled it out with pliers, then inserted the new and pressed it in and Presto the drawer now works good again.
Parts Used:
-
Edward from Chandler, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Getting the light socket to snap back in properly
-
Robert from HELENA, AL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
1 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water filter needed replacing
Loved the website. Easily found the part I needed. Filter received in two business days. Wow, really fast service. Replacing water filter was a piece of cake. Pulled out old filter, removed caps from new one and slid it into place. Will certainly look to this company for parts in the future.
Parts Used:
-
MaryLou from Woodburn, OR
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker wouldn't fill
I had a repair man do the work.
That's always best.There was one day delivery on the part and the price was great. Thanks
That's always best.There was one day delivery on the part and the price was great. Thanks
Parts Used:
-
Robert A. from St. Augustine, FL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set, Wrench (Adjustable), Wrench set
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Actuator broke off
I noted this repair as easy and it is if you know what you are doing. I read the repair stories on line and thought I would give it a whirl. I ordered the part on line and in my haste I didn't even consider that I would need to order by color. I have a black appliance. To my dismay when the part came it was white. While waiting for the part I had attempted to find the small screws that would allow me to get to the repair site as described in the sucessful repair stories. There was no screws visible. The water pan on my model does not come out and there didn't seem to be any way to get to the actuator without prying off the ice and water portion of the frig. I was afraid to take a screwdriver to my frig as I didn't want to scratch it up . I decided to just call a repair man. He came with the black actuator. I returned the white actuator. The repair took about 15 min. He popped off the front which I was afraid to try and took out the three tiny screws and replaced the part. The total charge was $167.00. $75.00 of the charge was for diagnosis even thought I told that no diagnosis was needed. Part cost was $19.99 and th rest was labor.
Parts Used:
-
Janice from Fresno, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the crisper support broke
I used the paint spatula to pry out the old part and then put in the new part and pushed in the holder with my fingers. Super easy.
Parts Used:
-
Bambie from Canoga Park, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the nylon bearing hinge was broken on the left door.
Removed cover from top bracket with phillips sd. removed bracket with socket wrench; lifted door from hinge; removed remnants of old hinge from recess, this took a while because it had broken inside, eventually I used needle nose pliers to break it up and pull it out in three parts; installed new bearing hinge; reset door, and installed bracket and cover.
Easy!
Easy!
Parts Used:
-
christopher from pasadena, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Socket set
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water Actuator broke & water filter expired
Changing the water filter was extremely easy.
Replacing the water actuator required a little patients but was a relative easy fix aslo.
Good luck.
Replacing the water actuator required a little patients but was a relative easy fix aslo.
Good luck.
Parts Used:
-
Jonray from Granbury, TX
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wife broke water dispenser actuator
I had seen technician remove cover for warranty repair. If I had not I would have been in trouble... I removed tray exposing screws, removed screws and lifted off cover. I then pulled off connector to circuit board. I removed the three screws holding the broken dispenser part and removed it. The reverse was easy. The hinge cover was easy since I had learned to slide it forward FIRST (that's when I broke it). The shelf supports were tricky. The old ones would not come out. I sawed them off with a serrated knife and then picked the pieces out. Installing the new ones wasn't going well until I realized that I had to hammer the pegs in. Then they went right in.
Parts Used:
-
Peter from Nashville, TN
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
1 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken shelf support
-
Jerome from Hendersonville, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old Door Handle broke
Slipped off the top and bottom screw cover plates unscrewed the 4 retaining Phillips screws, removed the old handle and replaced it by reverse the procedure. The best part of the process was the amazing quick delivery and efficiency of Parts Select.
Parts Used:
-
johan from redlands, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!