Models > WRS26MF5AW8 > Instructions

WRS26MF5AW8 Westinghouse Refrigerator - Instructions

All Instructions for the WRS26MF5AW8
781 - 795 of 1086
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The freezer portion of the refrigerator worked but the fresh food refrigerator did not
I watched the step-by-step installation video and followed the instructions therein.
Parts Used:
Evaporator Fan Motor Kit - 120V 60Hz
  • KIMBERLY from BROOKLYN, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
Freezer Upper Door Bin Broke
I ordered a freezer upper door bin and received the wrong part. I contacted PartsSelect immediately and they re-shipped the correct part. It was well packaged, I removed the part and paper towel wiped it down and snapped it into the freezer door bin. I highly recommend PartsSelect for their great products and Customer Service. I even add them to my contact numbers in my cell phone, they will be the first I call, when needing a part for any appliance!
Parts Used:
Door Shelf
  • Juana from Fresno, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The partition between the doors of the refridgerator was hot and the fan that cools the condensor and the coils was not working.
I replaced the condenser fan motor, but first I bought a brush to clean the coils. I first unplugged the fridge and took off the back panel. I located the fan motor and noticed how dusty it was back there. All the dust dirt and pet hair can accumulate making the motor work harder and overheat. I cleaned the coils with the coil brush and a shop vac. Once I cleaned it, I started to take off the three screws that held the fan motor suspended,its important that you move the fridge enough so you have adequate room to work. I unplugged the motor and finished removing the screws. When I removed the motor I was upset when I compared it to the motor I was sent because it looked physically different. The motor I removed had a plug that was integrated in the motor, but the one I received had a plug that pigtailed outside the motor. I called PartSelect and told them they sent me the wrong motor. The lady that I spoke with was very friendly and helpful, and after looking up my part # she assured me that it was the right part. Next I had to remove the fan from my old motor, the nut that held the fan on looked like a clip, but it screwed off using open pliers.I removed the fan and put it on the other motor, using the parts supplied. Before I installed the motor I screwed the three screws in and out of the three screws holes to make the screws go in easier during instalation. I installed the fan motor using the three screws supplied, and once it was secure I spun the fan with my finger, making sure the fan spun freely and installed the plug to the fan. I then plugged in the fridge to make sure the fan was working,and replaced the back panel. Hope this helps you out, good luck.
Parts Used:
Refrigerator Condenser Fan Motor Kit Crisper Support - Rear Hinge Bearing
  • Jim from Simi Valley, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Missing snaps and bar on fridge door
I was unsure how I was going to be able to make this repair. However, it was so easy I have planned to order other items to make the repairs myself. I am a rental manager at a condominium complex and I think my homeowners will be very happy when they see how much money we can save them by our office doing the repairs.
Parts Used:
Wire Shelf
  • Sharon from Destin, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
No ice was being dispensed
I removed the cover on the door to access the levers that dispensed the water and ice. I was able to pull the assembly out far enough to remove the damaged part and install the new one. It was fairly easy because i have small hands and did not need to pull the assembly out too far. Otherwise it went fairly smooth and was done in no time. The fact that I am a woman had no bearing other than the small hands part. My husband could not have changed the part for that reason. The ease in changing the part saved us quite a bit of money by not having to call a repairman. the only authorized repairman is about 40 miles away and with mileage plus installation it would have cost a fortune and being on a fixed income ease of part installation is great for us older people. thanks for great product.
Parts Used:
Ice Actuator
  • Bette from Morris, IL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Meat drawer rail broke after the kids leaned on it.
Removed the drawer rails from the shelf, installed the new ones. Viola!
Parts Used:
Meat Drawer Rail - Right Side Meat Pan Rail - Left Side - White
  • Michael from Kensington, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
kids used fridge door drawers as stairs and broke them!!!
Replaced all broken pieces quickly for very cheap! Website very easy to use!!!
Parts Used:
Upper Crisper Drawer Cover - Glass NOT Included Door Bin
  • Chelsea from Plainfield, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Door making noise and not closing automatically
Followed video instruction provided on this site.
Parts Used:
Hinge Bearing
  • Rick from Cerritos, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Side Mounted Ice Maker Quit Functioning,
1st my 72 year old husband has not had great success in repairing anything: electrical or plumbing. We got the part the next day. Had ordered it late one afternoon and had it the next morning in Wyoming. From the time we took it out of the box, disconnected the old one, plugged in the new one, remounted, it took less than 15 minutes. Amazing and it works great. Didn't need extra electrical connector, but tricky part on electrical connectors is to squeeze side to take apart and put back together. He used mirror to see the screws to loosen to take out and put back in ice maker. Next day our tray was full of ice. Good service/Good Product.
Parts Used:
Replacement Ice Maker
  • Sandra from Casper, WY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
When you opened the refrigerator door, it made a big thump....
Easily found the parts we needed from the diagrams, Hinge bearing and door closing cam, watched the video, which was very helpful, ordered the parts from the parts list numbers...Our order came in just a few days and my husband put the parts on in about 20mins. Couldn't have done it without the help we found on your page...Thank you so much....Will be back if we have any other trouble.... Bill and Ellen Lopitz.....
Parts Used:
Door Closing Cam Hinge Bearing
  • Ellen from Springfield, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Wrench set
Was this instruction helpful to you?
Thank you for voting!
broken shelf
Out of the box and slipped right in on the door. Part was here in 3 days. Excellent service.
Parts Used:
Door Shelf
  • James from Warren, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
broken refrigerator door bin
It really was a replacement rather than a repair, but I think it worth my while to relay how easy it was to find and order the new bin from Part Select. I was pleased with everything from finding the correct part easily to the shipping and payment. Thank you for such a vauable source to tap from any time I need a part. I am very happy to recommend this service to anyone who may need it.
Parts Used:
Refrigerator Door Bin
  • diane from birdsboro, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Our old dispenser broke
At first I thought I ordered the wrong cover for my refrigerator but when I removed the electronic from the old one I realized it was the right one. I had to remove the facing from the old one and reapply it to the new one. After that the rest was easy.
Parts Used:
Dispenser Cover
  • Enrique from San Marcos, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Bottom refrigerator door shelf broke
My clumsy daughter used the shelf as a stepping stool and broke it right off. The new shelf was literally a snap to install. I only had to snap it in place. The new part came the next day after I ordered it, I was amazed. I was expecting it to come to my door about 3 days later. It was super fast.
Parts Used:
Refrigerator Door Bin
  • Thomas from Sunrise, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Broken bottom door bins
Our parts arrived very quickly and fit perfectly!
Parts Used:
Refrigerator Door Bin
  • Lisa from Belton, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the WRS26MF5AW8
781 - 795 of 1086