WRS26MF5ASK Westinghouse Refrigerator - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
ice maker doesn't work
-
Carol from Salem, WI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plastic shelf support broke
Took out the support and put back in the new one.
Parts Used:
-
Derek from Graham, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
0 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
not making ice
turned off water supply, removed cardboard back, removed supply line, unhooked all color coded connections,took out bad water valve and replaced with new one note: the new valve came with pex connections so i carefully cut off flared tubing ends with sharp razor knife making sure when i pushed tubing into new valve that i did so with some force until i HEARD and felt them snap in place very simple plus i received the new valve in 2 days very happy with PartsSelect.com you CAN do it
Parts Used:
-
mark from east greenwich, RI
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Wrench (Adjustable)
0 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water leaking from broken intake water line
Turned off water supply disconnected hose from valve removed cardboard backing removed the screws holding valve ass'y disconnected the three wire connections disconnected five hoses then cut and installed in new valve per instructions provided reconnected three wires reinstalled valve ass'y turned water supply back on and checked for leaks by engageing filtered drinking water in the refrigerator door replaced backing to complete job.
Parts Used:
-
Jamie from Weeki Wachee, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Socket set, Wrench (Adjustable)
0 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wanted to change features
Fridge came ice maker assy configured with an ice cream shelf to maximize space. I found this annoying becuase it blocked access to the ice maker controls and ice bin, which is useful for bulk access even thought there's a door front dispenser for ice. I recognized parts diagrams for a similar model and corrctly assumed they'd fit. So for $30 and an easy change I have the feature I wanted. Pretty cool.
Parts Used:
-
W from Lafayette Hill, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
2 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Glass tray was missing
My repair was a simple as logging on to the "PartSelect.com" website - very easy to find the specific part I needed. The website makes the part selection a breeze.
Parts Used:
-
Susan from Phoenix, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
1 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Husband pushed water to hard and though it was the ice maker
-
Thelma from Hickory, NC
-
Difficulty Level:Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers
4 of 20 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water spraying from behind refrigerator
remove back cardboard panel, cut off water supply, remove screws holding valve to back of refrigerator, unscrew water lines & reattach to same fittings on new valve, screw new valve in place, replace cardboard cover.
Parts Used:
-
mike from tampa, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers, Wrench set
1 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
shelf in door broke
-
donald from cuba, NY
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
the compressor capacitor overheated
it was great. I ordered the capacitor for my frigidaire frig and it arrived
in 3 days. plugged in the part to the compressor and my frig has been
working ever since. I spent 3 minutes ordering the part and 30 seconds
attaching it to the frig. Easy, very easy. saved myself a 75 dollar repair
visit. thanks
in 3 days. plugged in the part to the compressor and my frig has been
working ever since. I spent 3 minutes ordering the part and 30 seconds
attaching it to the frig. Easy, very easy. saved myself a 75 dollar repair
visit. thanks
Parts Used:
-
Bart from goldsboro, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Old parts broke.
Took out two screws, installed new parts, put screws back in. Done.
Parts Used:
-
Roger from Coppell, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Refrigerator and freezer were not cooling properly
I can fix just about anything, but when I'm approaching to fix an item that I have previously no experience with I always do some research before attempting a repair. Once I diagnosed the problem (The evaporator fan was not kicking on), I purchased both the thermostat and fan because either one of them could be the source as to why the refrigerator was not working. Unless you want to drink room temperature milk for three to four more days, I highly recommend that you replace both. After cleaning out the freezer and removing the pull out bucket, I removed the screws and pulled out the metal enclosure. The fan was easy to take out along with the thermostat. The time consuming part of the repair was splicing the old wiring harness with the new thermostat and condenser fan since the replacement condenser fan had a different wiring harness. I had to heat sink the butt splice connectors and I wrapped all the wires in a cold weather electric tape. After that I plugged the refrigerator right in and to my delight it worked :) I love this website because it is very user friendly accompanied with fast and efficient shipping. Thanks again!
Parts Used:
-
Alex from HILLIARD, OH
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
water valve leaking
Installed new valve.There are several pieces of tubing coming off of the valve. Pay close attention to where they go. Color coordination is poor on the new valve.
Parts Used:
-
Anthony from Indiana, PA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
Crisper Cover support had broken
I watched your video on how to do the procedure and followed it, step-by-step. It worked like a charm. When I took the crisper drawer and runner out of the refrigerator, I noticed that the lower drawer support had broken as well. So, I have ordered 4 to have a few on hand and will repeat the process when my new order arrives. I'm very pleased! Thank you very much.
Parts Used:
-
M Jerdone from Seneca, SC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
Was this instruction helpful to you?
Thank you for voting!
Refrigarator & freezer were not working
We took out the air damper and replaced the control with the one we purchased. It would probably work easier but it works and it saved us a lot of money not having to hire someone to come out and replace it. The refrigerator should be a little cooler but is within range therefore we hope it continues to be ok.
Parts Used:
-
Shayne from Osteen, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!