WRS26MF5ASF Westinghouse Refrigerator - Instructions

pulled the old seals off one at a time and starting from the top of each door, pressed the top edge of the seal into the groove, using the quik clamps to hold the top in palce at each top corner, went down each side of the door and pressed the seal into the groove, when I reached the bottom, I moved the clamps to the bottom and used thm to help press the seal into the bottom groove, Each door took about 15 min.

I followed exactly the video instructions on your web site. They are perfect and simple.

Fixing the meat drawer slides was really easy and I got it fixed in a snap. What I wanted to tell you was that I ordered the wrong bins twice and your customer service person was just great she got me the wright bin and made returning the wrong parts very easy. I would like to complement her on her service.

Simply removed old bearing with the pliers and aligned new beating into the socket.

Just set the new shelf over the clips on the door. VERY easy.

followed the video and had little or no trouble loosening or tightening bolts or phillips head screws. The only difficulty was removing the spacer on the door itself. Otherwise a piece of cake. Good video and easy to follow instructions.

Turned off the refrigerator, removed the bottom drawer from refrigerator, then removed the glider bars for the drawer on the left side where the filter chamber is. Removed the filter and then removed the plastic peace guarding the filter chamber. Once that was all removed we removed the screws holding the filter base in place. Now that everything was exposed we removed the inlet and outlet lines from the filter base by pushing in the nobs inside the base and pulling the lines out with some slight elbow grease. After that we just proceeded in reverse. We plugged the filter in after the base was secure to make sure that the fix worked. The repair worked like a charm, was relatively simple and now our fridge is all better with water and ice without a large repair bill :o)

Replaced

The repair was very easy, just a matter of snapping the bin on the door. However, i was very please and impressed with the expeditious service that i received. I ordered the door around noon and it was delivered by 10am the next day. This is what i consider "quality service" and I thank this company sincerely.

Took out two screws, installed new parts, put screws back in. Done.

I can fix just about anything, but when I'm approaching to fix an item that I have previously no experience with I always do some research before attempting a repair. Once I diagnosed the problem (The evaporator fan was not kicking on), I purchased both the thermostat and fan because either one of them could be the source as to why the refrigerator was not working. Unless you want to drink room temperature milk for three to four more days, I highly recommend that you replace both. After cleaning out the freezer and removing the pull out bucket, I removed the screws and pulled out the metal enclosure. The fan was easy to take out along with the thermostat. The time consuming part of the repair was splicing the old wiring harness with the new thermostat and condenser fan since the replacement condenser fan had a different wiring harness. I had to heat sink the butt splice connectors and I wrapped all the wires in a cold weather electric tape. After that I plugged the refrigerator right in and to my delight it worked :) I love this website because it is very user friendly accompanied with fast and efficient shipping. Thanks again!

Installed new valve.There are several pieces of tubing coming off of the valve. Pay close attention to where they go. Color coordination is poor on the new valve.

Very easy repair. Remove 2 screws, unplug wire harness. My model used the included harness adapter. I needed to secure the extra harness length with the included cable ties. Icemaker went back in smoothly with no problems. Making ice like crazy now.

I watched your video on how to do the procedure and followed it, step-by-step. It worked like a charm. When I took the crisper drawer and runner out of the refrigerator, I noticed that the lower drawer support had broken as well. So, I have ordered 4 to have a few on hand and will repeat the process when my new order arrives. I'm very pleased! Thank you very much.

The defrost thermostat kit is located in the freezer side of the refrigertor. I turned off the electrical breaker for the refrigerator. I began the project by removing all the frozen food on the lower half of the freezer. I removed the racks and 3 rails on both sides using a cordless drill with a 1/4" socket and located panel. The panel had 4 1/4" screws holding it to the back of the freezer. I removed all screws and the panel came out easy. I located the defrost thermostat and with some wire cutters, I cut the wires. I connected the the new defrost thermostat with wire connectors and reattached it to the copper tube I removed it from. I put the panel back on along with the side rails and racks.. This project was very easy.