WRS26MF5ASB Westinghouse Refrigerator - Instructions

So easy ... all I had to do was to snap the shelf into place - all of 2 seconds. The best part of the process was ordering the exact part I needed and how quickly it was received - awesome service. Thank you.

So easy a cavewoman could do it!

very easy just snaped shielf in

just instilled some screws to the shelf to hold in please to give them more hold on to on the doors

loosened two 1/4 in. screws removed ice maker unplugged harness. Plugged back in slid the replacement ice maker over the two screws secured. Done

took ice maker out empty ice removed 6 screws removed auger out took off lcck nut pulled off drum replaced with new drum reassembled.

I diagnosed the problem by checking the water flow at the supply valve and hose by disconnecting the hose from the back of the fridge. Found the pressure to be adequate. I then reconnected the supply hose and removed the cardboard backing from the fridge and removed the nuts holding the water inlet valve to the chassis. I loosened the first hose that runs from the bottom of the valve and had my wife activate the valve by pushing the water switch on the front of the fridge. Water basically sputtered out of the valve and I decided that was where the problem was. I ordered the valve from partselect. When it arrived I thought it was the wrong part because it had push-fittings whereas my original valve was all thumb screws. I took a chance and one by one used a utility knife to cut the hose free of the old valve as close to the nut as possible. Connecting them to the new valve was a piece of cake! Just make sure the hose bottoms out when you push it in. I turned the water back on, no leaks! Plugged the fridge in and pushed it back to the wall. After a bit of air bled out I had a strong flow of wateragain like new! The next day the ice cubes were solid again! We use the filtered water so many times a day and had been so frustrated with the slow water flow we had considered donating the fridge and buying a new one; thanks to this easy fix we expect keep it for years to come!

I did it just like the video it was that easy! love this web site amazing!

Upon receipt of replacement part I simply snapped it into place. More accurately, the "less than 15 mins" above was more like less than 15 seconds. Ordering this part was easy and clearly understood. I ordered about noon one day and received the FedEx shipment evening of the following day. Incredible! While somewhat pricey for what the part is I understand the costs associated with stocking minor parts and am totally happy with my whole shopping experience at PartSelect. I have already recommended PartSelect to others and have bookmarked the website for future reference as needed.

Pulled out the old bin, slid in the new bin. Bingo. Like new again.

Snapped into place- no tools

Removed the old container, opened the replacement, put it in and it worked perfectly. Great job! Arrived quickly, well packed and in perfect shape.

I followed a video I found on how to take the front off of the ice dispenser ( to me the hardest part) Once I was in there it was a matter of removing the pin and spring,then putting the new flapper in place of the old. Hardest part in reassembling was getting the spring back where it belongs. After that it was a matter of putting the ice dispenser back together and testing. Works perfectly.

Replaced ice maker - easy to replace but it did not fix the problem.

Remove 4 screws to get the housing cover off. Remove the lock ring that holds the ice auger in place. REmove 4 screws to get the crusher housing off. Reverse the order to replace the housing. Very simple.