Models > WRS26MF5AQW > Instructions

WRS26MF5AQW Crosley Refrigerator - Instructions

All Instructions for the WRS26MF5AQW
691 - 705 of 965
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Two broken door shelves
Wiped down the new shelves; popped them in place; done in about 1 minute each. Delivery was as expected; watched progress of packages on the Fed Ex site. Delivered as promised.
Parts Used:
Refrigerator Door Bin
  • Bonnie from Corrales, NM
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
brocken
replaced with screws driver and removed the old one put the support.thank for fast service.
Parts Used:
Crisper Cover Support - Front Meat Drawer Rail - Right Side
  • Julio from naples, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
missing door shelf
The part was delivered the next day, but I had ordered the wrong part. I sent it back and they made it really easy to return it.
Parts Used:
Door Bin
  • Sharon from Hesperia, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Door bin broke
Just ordered a new door bin replacement and installed it.
Parts Used:
Refrigerator Door Bin
  • Nancy from Apex, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
water dispenser/ice maker inop
Removed old water pump and cut off ends of all lines. Plugged them into each water inlet/outlet and turned it on. Instant water to dispenser but took about 6 hours for ice maker to get water. Had to prime the ice maker. Works great and saved a lot of money ordering parts from you. Thanks.
Parts Used:
Refrigerator Water Inlet Valve
  • Michael from White Springs, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
meat shelf was broke
got the new one replased it and it was easy plus im certified in majjor apliences
Parts Used:
Door Shelf Refrigerator Door Bin
  • michael from kennewick, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
support broke
just put it in the old hole. the hard part was getting the old one out. you have to poke the center piece in to remove. otherwise you will break your fridge. then you have to to pull the center piece out before you put new in.
Parts Used:
Crisper Cover Support - Front
  • Lisa from Mena, AR
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
refrigerator staying to warm
husband did it took only a few min part was easy to find
Parts Used:
Defrost Thermostat Kit
  • nicole from chipley, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
water valve leak
Easy to assemble after cutting original water line fittings off. Use sharp knife to keep from damaging end of water lines.
Parts Used:
Refrigerator Water Inlet Valve
  • Donald from Wilmington, NC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Air damper noisy
removed old air damper, installed new one. one nut driver, 5 screws. replacement had motor and switch included. $80 delivered ups 1 day.
Parts Used:
Damper Assembly - 115V 60Hz
  • Thomas from Danvers, MA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
broken hinge bearing
replaced hinge bearing and cam
Parts Used:
Door Closing Cam Hinge Bearing
  • JAMES from SURPRISE, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Wrench set
Was this instruction helpful to you?
Thank you for voting!
The Plastic Tabs that hold the shelves are too thin/small
The shelve bin tabs broke because they don't snap in properly so they get knocked out occasionally. They hit the floor and if what's in the door is heavy and lands on them they break. Snapping in a new one is not a problem, it's ordering/paying/shipping/waiting. They need re-designed so they fit more securely.
Parts Used:
Crisper Drawer Cover - NO Glass Door Shelf
  • Cheryl from Huntsburg, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
broken crisper drawer
just pull out broken crisper, and push in new crisper drawer.
Parts Used:
Upper Crisper Drawer Cover - Glass NOT Included
  • MORGAN from ARCADIA, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Broken door shelf
Remove broken shelf and install new shelf. And that's it
Parts Used:
Door Shelf Refrigerator Door Bin
  • robert from virginia beach, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
both bottom door bins broken
the parts where a perfect match and they snapped in place
Parts Used:
Refrigerator Door Bin
  • Brenda from Conyers, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the WRS26MF5AQW
691 - 705 of 965
Back to Top