WRS23MW3AWL Crosley Refrigerator - Instructions

1. Turned off water and unplugged refridgerator. 2. Removed the drip tray. 3. Removed the 3 screws under drip tray. 4. Pulled facing off the fridge. 5. removed the 3 screws at top of dispenser. 6. Pulled the dispenser out far enough to remove broken actuator. 7. Removed 2 screws holding broken actuator in place. 8. Removed broken actuator and replaced with new actuator. Re-attached everything in reverse. Be aware that there are two serial numbers on the labels inside the refridgerator. The one with the letters at the end tells the color of the refridgerator. I had to return and reorder. The company emailed me the instructions and that went well too.

take front panal off and unplug the electrectal tail to the front panal then unscrew the 4 hold down screws then take out broken part and then replace with new part and re-assemble front panal

My Frigidaire Drawer broke... I ordered the parts and installed it within 5 min. It took more time to remove the food and drawer then it did to install the pegs.

First I remove the water catch tray. Then I removed the three screws the hold the face plate on. ( You do have to slide face plate upward) I let that hang gently. Then I removed the three screws that hold the mother board in place, tilt the motherboard out to be able to see the back of the actuator. Remove three screws and flanges that hold actuator in place. Look at how spring is held in place before removing. Remove actuator, replace with new actuator set spring, replace screws and flanges, push motherboard back in place,replace the three screws,replace face plate with the three screws and replace catch tray. And your done!!!!

Took out the support and put back in the new one.

Fridge came ice maker assy configured with an ice cream shelf to maximize space. I found this annoying becuase it blocked access to the ice maker controls and ice bin, which is useful for bulk access even thought there's a door front dispenser for ice. I recognized parts diagrams for a similar model and corrctly assumed they'd fit. So for $30 and an easy change I have the feature I wanted. Pretty cool.

it was great. I ordered the capacitor for my frigidaire frig and it arrived
in 3 days. plugged in the part to the compressor and my frig has been
working ever since. I spent 3 minutes ordering the part and 30 seconds
attaching it to the frig. Easy, very easy. saved myself a 75 dollar repair
visit. thanks

replaced hinge bearing and cam

It was simple as snapping the new part in place.

Watched the tutorial and I would say it took longer to clean the condiments from the door and take the shelves out than the repair. The easiest repair in my life.

It was easy I watched the video on how to replace it that Parts Select had on line. It was easy, it took me approximately 20 minutes to complete. Thanks for having the video, everything went very smoothe.

I watched the videos (they really help) and followed the steps. Everything went smooth with no surprises

Firstly I watch the video from the web site as how to install the part, and it was a breeze from there. The video was just super!! It took any doubt away how to access the broke part, how to remove it and how to replace it. The arrived in two days and was installed the same day.

Took all food out of the refrigerator door. Pulled the door off by unscrewing the 3/8 hex-head screws on top and bottom hinges. The door is relatively light and removes very easy. Unscrewed and removed the broken plastic cam pieces and replaced with the new ones. Replaced the steel hinge, even though it was still in good shape. The hinge kit comes with left and right hinges as well as a spare cam insert with each hinge, so I still have all the left side parts and spare cam insert for the right side for a future fix if needed. The repair itself was extremely easy and took about 10 minutes; the total time that included emptying the food, cleaning the bottom grill plate and replacing the food was about 20 minutes of my evening.

First thing I watched the video attcahed to the e-mail I received, and was happy to get that I am legely blind (vision 20/200) and must have someond read the instructions to me . with your video aqnd feeling for screw heads we did the job in arround one hour I got all screws out and new part in without any thing left over. James H. Meade