WRS23MW3AW1 Westinghouse Refrigerator - Instructions

We watched the video you had available. WOW! We had been frightened away by a repair man. Anyway, we pried the broken supports off, and then pounded the posts into the wall where they dropped down out of sight. We placed the new supports in and put the drawers back in. Viola! Done! Took less than 10 minutes! Thank you!

Watched the Parts Select video associated with this part. Very easy repair. Removed the right-hand door, removed the broken hinge, popped in the new part, applied some lubrication and put the door back on. Lengthiest part was removing food items from the door in preparation for the job. Highly recommend watching the video first as it shows you exactly what to do and how easy this job is.

Removed the door,pried out broken pieces.Replaced with new bearing{bushing}Lubricated bearing with light grease and replaced door.Took about 15 minutes by myself.

I can fix just about anything, but when I'm approaching to fix an item that I have previously no experience with I always do some research before attempting a repair. Once I diagnosed the problem (The evaporator fan was not kicking on), I purchased both the thermostat and fan because either one of them could be the source as to why the refrigerator was not working. Unless you want to drink room temperature milk for three to four more days, I highly recommend that you replace both. After cleaning out the freezer and removing the pull out bucket, I removed the screws and pulled out the metal enclosure. The fan was easy to take out along with the thermostat. The time consuming part of the repair was splicing the old wiring harness with the new thermostat and condenser fan since the replacement condenser fan had a different wiring harness. I had to heat sink the butt splice connectors and I wrapped all the wires in a cold weather electric tape. After that I plugged the refrigerator right in and to my delight it worked :) I love this website because it is very user friendly accompanied with fast and efficient shipping. Thanks again!

Very easy repair. Remove 2 screws, unplug wire harness. My model used the included harness adapter. I needed to secure the extra harness length with the included cable ties. Icemaker went back in smoothly with no problems. Making ice like crazy now.

I watched your video on how to do the procedure and followed it, step-by-step. It worked like a charm. When I took the crisper drawer and runner out of the refrigerator, I noticed that the lower drawer support had broken as well. So, I have ordered 4 to have a few on hand and will repeat the process when my new order arrives. I'm very pleased! Thank you very much.

The defrost thermostat kit is located in the freezer side of the refrigertor. I turned off the electrical breaker for the refrigerator. I began the project by removing all the frozen food on the lower half of the freezer. I removed the racks and 3 rails on both sides using a cordless drill with a 1/4" socket and located panel. The panel had 4 1/4" screws holding it to the back of the freezer. I removed all screws and the panel came out easy. I located the defrost thermostat and with some wire cutters, I cut the wires. I connected the the new defrost thermostat with wire connectors and reattached it to the copper tube I removed it from. I put the panel back on along with the side rails and racks.. This project was very easy.

take 1/4 hex screws out clean out dust ,remove old fan blade replace with new install bolts .

I followed the instructional video and it went well except the piece in the door did not pop out easily and broke into other fragments. I had to use a needle-nose pliers to remove them from the cavity in the door.

Removed the door, removed the broken part, inserted new part, used vaseline on all exposed parts and put door back on (better than new)!

Replacing the tray was easy once I received the correct tray. It seems the part number on the tray had been changed over the years since I had purchased the refrigerator. By ordering the part from just the catalog, I had no idea I was ordering the wrong part. When I received the part, I called and the representative who I spoke with told me of the problem and with the serial number the correct part was ordered...good Customer Service.

It was a piece of cake took mins Thanks ps for those who are not mechanical they even have videos to show you how to make the repair

I watched the do it yourself video which helped tremendously. My husband was busy so I was able to do it myself.

Easily done. Great fit.

Not long after we bought this fridge, the plastic on the light switch cracked, making the lever stick out too much so that the door wouldn't close. It's been taped down ever since. I simply pulled the old switch out and plugged the new one in. I'm kicking myself that I didn't do this ages ago. It was so easy and now I can see inside my refrigerator again.