WRS23MF5ASD Westinghouse Refrigerator - Instructions

removed the old parts with a philips screwdriver then repalced those parts with the new parts and knocked the keeper inwith the small hammer

It was just a matter of taking out 1 screw that held the old support, replacing the drawer support with the new piece and replacing the screw that held it on.

took existing water valve loose, removed plastic water lines and reinstalled on new valve and installed new valve into refrigerator

Removed the one screw holding the rail, positioned the new rail and put the screw back in.

This was the best company I ever dealt with - the part arrived in less than 24 hours. Incredibly fast,
and the order was right the first time.

took out bottom plate where the glass sets removed 3 screws at bottom lifted up on face plate and pulled out the cover (unplug controls) 3 more screws and operating unit was out. Important....unplug electrical connection on the left side 2 screws to remove actuator and replaced with new one.
Reverse steps.

This is an easy repair. Unplug appliance. Remove the old water valve by unscrewing it from the frame of the refrigerator. Disconnect the cables and all the water hoses. The hose fittings are a different type: clip off the old connectors from the hose ends and push the hoses straight into the new connectors till they fit solidly. Reconnect the cables and screw the valve back onto the frame of the refrigerator.
Unfortunately, my leak was from a hose, not the valve, so this didn't actually fix it.

Opened the box. Took off the end caps and popped it right into place. Easy as pie!

Dropped it in!! A two minute fix. No problem.

Water was leaking so I replaced the entire valve and just followed the color codes and thats it. Plug and play.

The filter was readily removed by pressing the appropriate button. The replacement fiter easily slipped into place.

One screw to remove the old part, and screwed in the new one. Easy as pie. Keep the screw from the old part as the new one did not have one.

Removed the water filter cover and then removed the water filter in place, and replaced with the new filter, replaced the cover. Repair done, less than 2 minutes.

I pull out the broken part by push the center pin thru and then rerome all the parts. I then positioned the new part in place and push in the center pin to lock. quick and easy.

Have not really done the repair yet( frig is still to full of Thanksgiving leftovers) but I am sure that with the video that was provided by this site the job will be very simple. Many thanks to the person who put the video together.
John Donnelly

I took out the old filter and put in the new filter. I ran some water through it and it was done.