Models > RS20DKXDN00 > Parts

RS20DKXDN00 Roper Refrigerator - Parts

All parts for the Roper Refrigerator RS20DKXDN00

Below is a list of all parts for the Roper Refrigerator RS20DKXDN00 - Side-by-side REFRIGERATOR. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the RS20DKXDN00
1-14 of 203
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$54.14

Crisper Drawer with Humidity Control

The humidity control allows you to adjust the humidity within the crisper. This can extend the life of the vegetables/fruit.

$2.52

Light Bulb - 40W

Sold individually.

$3.84

Door Cam

Note: As per manufacture a new screw is needed to mount door cam. Sold individually.

$15.99

Defrost Timer Kit

This eight-hour defrost timer will replace most other defrost timers. This device acts like a clock. It continually advances and alternates between activating the cooling cycle and the defrost heater. The best way to make sure you get the correct timer for your refrigerator is to conduct a search for your model number.

$53.86

Meat Pan with Handle

$57.82

Thermostat Assembly

The thermostat will sense the temperature increase in the evaporator during the defrost cycle and will cycle the defrost heater off after the ice or frost is melted.

$27.87

Bi-Metal Defrost Thermostat

If ice is building up in your freezer or if your freezer is getting too warm on the defrost cycle you may need to replace the bi-metal thermostat.

$30.70

Condenser Fan Motor Kit

This condenser fan motor operates in a clockwise fashion and carries carries 2W and 115V. It comes with screws, a blade mounting nut, and a cushion. This part provides forced-air cooling for the condenser coil.

$3.37

Door Shelf End Cap Kit

This door shelf end cap kit contains two white end caps, two adhesive strips, and an instructions sheet. Each end cap can be used as either for the left side or the right side.

$10.86

Door Closing Cam Kit

This door closing cam kit is intended for use with the bottom of refrigerator and freezer door hinges. The cam helps with the closing of the doors and to keep them slightly in position when opened.

$2.70

Screw

This screw is sold individually.

$69.50

Shelf Frame with Glass

This part is also known as Cover.

$2.20

Shelf Retainer End Cap

$20.61

STUD-SHELF

All Parts for the RS20DKXDN00
1-14 of 203