Mon-Fri: 7am-1am EST / Sat-Sun: 7am-11pm EST
If you placed an order on ApplianceHelp.com the order is still valid and you can check on its status and make changes here on PartSelect.com. Click here for more details.
If you know the refrigerator repair part you need, you can browse the list of all parts on the RS20DKXDN00, or you can search by name or part description. You can also find your part by where it is located on the RS20DKXDN00 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for RS20DKXDN00 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.
There are 8 diagrams for RS20DKXDN00. Click on the diagram where you think your part is located.
Choose a symptom to view a list of parts that fix that symptom.
The humidity control allows you to adjust the humidity within the crisper. This can extend the life of the vegetables/fruit.
Note: As per manufacture a new screw is needed to mount door cam.
This eight-hour defrost timer will replace most other defrost timers. This device acts like a clock. It continually advances and alternates between activating the cooling cycle and the defrost heater. The best way to make sure you get the correct timer for your refrigerator is to conduct a search for your model number.
The thermostat will sense the temperature increase in the evaporator during the defrost cycle and will cycle the defrost heater off after the ice or frost is melted.
If ice is building up in your freezer or if your freezer is getting too warm on the defrost cycle you may need to replace the bi-metal thermostat.
This condenser fan motor operates in a clockwise fashion and carries carries 2W and 115V. It comes with screws, a blade mounting nut, and a cushion. This part provides forced-air cooling for the condenser coil.
This door shelf end cap kit contains two white end caps, two adhesive strips, and an instructions sheet. Each end cap can be used as either for the left side or the right side.
This door closing cam kit is intended for use with the bottom of refrigerator and freezer door hinges. The cam helps with the closing of the doors and to keep them slightly in position when opened.
Fixed by these parts
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2014 , Eldis Group Partnership. All rights reserved.