Quick Question!

Have you ever purchased from PartSelect.com before?

Models > RGB746HED3WH > Parts

RGB746HED3WH Hotpoint Range - Parts

All parts for the Hotpoint Range RGB746HED3WH

Below is a list of all parts for the Hotpoint Range RGB746HED3WH - Freestanding, Gas. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the RGB746HED3WH
1-14 of 205
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.88

Light Bulb - 40W

This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these repla...

$42.46

Flat Style Oven Igniter Kit

The flat style oven igniter kit comes with a mounting bracket and a wire connector with a plug. The igniter kit is used to heat your oven. If you notice that your oven will not heat up properly, the igniter kit may need to be replaced. This flat style gas oven igniter has a body length of 3-3/4 inches. When completing this repair, the connector plug might need to be removed and spliced to the range wiring using porcelain wire nuts. Before you begin this repair, be sure to disconnect the power source from the oven, and shut off the gas supply.

$43.91

Oven Rack

The oven rack is sold individually. It is chrome in color and measures approximately 24 inches wide by 17-1/2 inches deep. The rack is used to hold cookware in the oven and slides ...

$15.19

Double Burner Pan - Right Side

$16.12

Double Burner Pan - Left Side

$19.86

Burner Head - Medium - 9500

This burner head, or surface burner, is used in ranges and ovens. The burner sends gas through the holes and slots to create an equal flame across the cooking area. If the gas igniter glows but will not light up, or there are heating inconsistencies, replacing the burner head could be the solution to your problem. No tools are required for this installation. To change the burner, first lift the grate and take the burner cap off. Next, lift the burner away from the cooktop. To set the new burner in place correctly, check the locating tab that fits into the V-shaped notch and make sure the igniter fits into the cut-out. Refer to the diagram provided by the manufacturer for further instructions.

$19.00

Grate

Sold individually. Must order quantity needed.

$13.75

Small Burner - 5K

Sold individually.

$2.87

Drawer Support

$1.63

Lens

$7.36

Foot - Leveller

Sold individually.

$104.90

Oven Sensor

It is possible that your oven is cold because of a fault in the temperature sensor. The temperature sensor regulates oven temperature in modern ranges, like a thermostat. It is on the back wall near the broiler on the top wall. On a newer oven, there may be a fault code displayed. Faulty temperature sensors are often responsible for F3 and F4 error messages on an electric range. Check your manual or the manufacturer website to find out the proper resistance of the temperature sensor. To check your sensor, unplug the oven and use a multi-meter to see if your sensor is at the correct resistance.

$3.29

SCREW

Sold Individually.

$3.52

CLIP ELECTRODE

Sold individually.

All Parts for the RGB746HED3WH
1-14 of 205