RB1000XVW0 Whirlpool Wall Oven - Instructions

My son is very handy. He had no trouble installing the new heating unit. The new part seems to be working well.

removed old burned out element, installed new element

Was waiting on my friend's boyfriend who is a contractor to switch this knob out but figured it out myself. It just slides on and off with no tools. I am so proud of myself for completing the repair all by myself on my 37 year old oven. My other knob just cracked and I was afraid the inside of the knob was damaged but it is not. Working like a charm now.

Piece a cake!
Turned off electrical breaker.
Removed original screws from old defective element and slipped in new replacement element.
Perfect fit!

The new knobs slide on and fit perfectly. No tools or labor required.

removed old burner. 2 screws. disconnected connectors and reconnected new burner screwed back in place. turned on stove worked first time. perfect fit. 15 minutes total repair time. item arrived promptly and at half the price of the Whirlpool website.

Really easy repair. Take two screws out, unplug two wires. remove old element, reverse steps with new element. Part arrived in two days, it was the best price I found also.

I tokk two srews out, pulled element out, disconnected wires, put wires on new element, put screws back in, turned the breaker back on , now oven heats up fine.

Thanksgiving one week away oven broke. I ordered parts on line and was ready to cook our turkey. Ordering on-line saved my Thanksgiving!
We were so happy

Removed the 2 screws in back of the oven that hold the element in place. Pulled the wires out and removed the element. Attached the new element and inserted the screws.

After figuring I'd have to buy a new oven, I figured out that it was the lower baking element. When I received the new part, I removed the two screws holding the element on. Gently pulled the element off the back oven wall and removed the wire connectors. Put the new element in place - rehooked the wire connectors and it works like new. The light bulb replacement was as simple as screwing in the new light bulb. Thanks, saved me alot of money.....

The part came as promised & and it was exactly the right part! I turned off the breaker to the oven (the oven has a clock and timer on it too). Unscrewed the 2 screws with a Phillips screw-driver and carefully removed the old part - being very careful to be safe and not make a big mess. It was easy to disconnect the wires and get the old element out. Then connected the wires to the new element, placed into position, screwed in the 2 screws, and turned on the breaker. It worked great. Then set the clock because it was 13 minutes slow!

turn off electric breaker, unscrew the 2 screws unplug the 2 ends replace old element with new repeat previous steps but unfortunately the control panel was also failing and that item has been discontinued.

The hardest part was taking out original light bulb because screws on shield where hard to unscrew after all this years . The old bulb vent out leaving neck in socket. It took narrow electrical pliers to get neck out .The generic appliance bulb did not fit and had aluminum neck ,not recommended for brass sockets in ovens.Putting new light bulb in was not the problem.

1. Unscrewed glass cover on bulb
2. Removed old bulb
3. Screwed in new bulb
4. Replaced glass cover
5. Mixed drink & baked cupcakes