PLD4375RFC0 Frigidaire Dishwasher - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Leaking Water Under Door
Well I had to take the door apart as I could not get the gasket in the track without taking off front.
Parts Used:
-
Steve from Loyall, KY
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
rubber part on end of arm came off and melted
took out the top rack. removed the spray arm put the new one in place. put the rack back in place.
Parts Used:
-
Sherry from Smiths Grove, KY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
upper spray arm came out of fitting
unscrewed fitting and screwed new fitting and spray arm in place. It appears to be a poor design on this model.
Parts Used:
-
James from Eddyville, KY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Top spray arm falls off
-
Ashley from Blue Earth, MN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Spinner fell off of delivery tube.
Wrap your pliers in some kind of padding so you don't damage the plastic. Spin the base ( not the spinner itself) which is left-threaded(normal). If the gasket doesn't fall out (mine did) pull it out gently. Clean the gasket socket with a rough cloth or scotch-brite pad and install the new one. Put it all back together and wash dishes, man.
Parts Used:
-
Jeffrey from Rougemont, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
Was this instruction helpful to you?
Thank you for voting!
The Upper Spray arm kept falling off
I ordered a replacement Upper Spray arm from partselect.com. It arrived one business day after I ordered it. Simply unscrewed the old arm by hand and screwed the new one in also by hand. No tools needed. Very simple!
Parts Used:
-
Cory from Norman, OK
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Dish Washer Leaked Water
The video was a tremendous help, and the video included in the final email was a stroke of genious, in that when it came time to make the repair, a review of the repair came in handy, to say the least. We are very satisfied. . Ps. The leake is fixed
Parts Used:
-
donald from venice, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The upper spray arm broke off & dropped onto the heating element during the wash cycle & melted in half.
When the upper spray arm broke, I thought it might a a costly repair. Thanks to this website, I found other people with the same problem. I ordered the part (by looking at the dishwasher diagram). It came in abt 3 days. All I had to do was screw it into place. That was it! No tools! It was awesome. When my husband came home from work that day, I was able to tell him, I fixed the dishwasher! No more washing dishes by hand for me! Thank you so much for everyone's feedfback on this site & to Part Select for being here.
Parts Used:
-
Teresa from Pennsauken, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
leaking aroung the door
-
cody from kalispell, MT
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Bad leak at bottom
Pulled old gaskets out, I could not get the bottom seal in until I used a mirror to see the slot it fit into, then it went right in, Tub seal was a brainless install.
Parts Used:
-
Wane from moville, IA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
Was this instruction helpful to you?
Thank you for voting!
spray arm fell out
simply unscrewed the old one by hand, screwed the new one on - took about 30 seconds. There is a plastic gasket inside the part that broke - it holds the spray arm in place and allows it to spin - the gasket is what wore out. easy / cheap fix. Don't call a repairman.
Parts Used:
-
Adam from Verona, WI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
original rack wheels where bent and upper wheels had melted
-
Sharon from South Park, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Upper Spray Arm Kept coming off
-
Tonia from Lumberton, MS
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
wheel missing
2 wheels were missing and I replaced them in 2 seconds. The diagram online was a huge help!
Parts Used:
-
WILLIAM from KENNESAW, GA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
Was this instruction helpful to you?
Thank you for voting!
Had to replace the drain hose (that I screwed up)
I already had the dishwasher removed for remodeling. I wrecked the drain hose myself. When I received the replacement it was a breeze to install.
Parts Used:
-
Steven from Wauwatosa, WI
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!