Models > PFSS6PKWASS > Instructions

PFSS6PKWASS General Electric Refrigerator - Instructions

All installation instructions for PFSS6PKWASS parts

These instructions have been submitted by other PartSelect customers and can help guide you through the refrigerator repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the PFSS6PKWASS
46-57 of 57
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broken Shelf

  • Customer: Bob from Midlothian VA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed broken component replaced with new - very easy and straightforward

Water filter needed replacement

  • Customer: Natalia from Mount Pleasant SC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Removed the old filter. Filled the new one with water and put it in theplace of an old one. Flushed the system with 1 gallon of water.

Evaporator freeze up

  • Customer: Peter from Homer Glen IL
  • Difficulty: Really easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Pulled off the evaporator cover and replaced the Temp sensor.

Poor water and ice taste, filter a few years old.

  • Customer: David from San Antonio TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Very simple, I followed instructions sent with the filter. Twisted old filter clockwise 1/4 turn to remove. Filled new filter with water, lined up arrow on filter to arrow on refrigerator, and then turned 1/4 turn counterclockwise. Filter raised and seated itself. Wiped few drops of water from refrigerator shelf.

The plastic on the vegetable tray shelf was cracked

  • Customer: Karen from Medford MA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
The repair was so easy. I had to take out all the food. Then I was able to easily lift the shelf out, and put the new shelf in and replace the vegetable drawers.

icemaker working poorly, almost not at all

  • Customer: Paul from Chesterfield VA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I looked at the parts online on Part Select, and determined that the most likely culprit was the icemaker unit itself. The other components did not appear likely to be at fault. Although it cost a bunch ($176)I figured it would be a lot cheaper than hiring someone to come in. The part came amazingly fast, via FedEx second day I think, and I simply looked at the part, and figured out to depress the tabs at the top while pulling the unit toward the front of the fridge, and it came out with moderate effort. One phillips head screw held the door at the left which once removed, allowed the electrical cord to be released after pressing the clip to release the catch. Installation was the reverse, and went really fast. Once connected, the icemaker began making ice after about 1/2 hour, then never stopped after that. Repair complete!! Very pleased.

Filter needed replacing

  • Customer: W Craig from Diamondhead MS
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Folowed instructions

replaced filter

  • Customer: donnie from metairie LA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
none required

on the french doors my granddaughter kept turning the inner seal bar when the door was open and when we went to close it it was in the wrong position and eventually the upper hinge broke

  • Customer: david from bridge city TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I took a small straight screw driver and popped the cap case off, removed old hinge and installed new hinge and snapped the cap back in place.. took all of 30 seconds

Flip lid was broken trying to force it open.

  • Customer: Frank from San Diego CA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I removed the vegetable bins as well as the side panels holding the flip panel. I then tilted the left panel and slipped the side pins in their respective holes. This took some time as it was difficult getting the housing under the drawers to fit back into the side ledges. I was ready to call for a repair serviceman but was proud when the job was completed.

Pin broke off of pantry cover frame

  • Customer: DENISE from Simpsonville SC
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Appreciated others comments before I had to repair mine! Took me a bit to get clear part out of white frame (with screwdriver). Popped clear part into new white frame, but then had to push on some parts to really get it to snap fully in. Then it was simple to put the one pin into the hole on the fridge and bend the frame slightly for the other pin to go in. Thrilled to have it look great and work correctly.

Ice Bucket cracked, Ice Maker leaking and making noise

  • Customer: Jason from Urbandale IA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I unplugged the fridge. I removed the old ice bucket, removed the screw on the cover for the ice maker cord, unplugged the cord, pushed in the clip that holds in the ice maker, pulled down and slid the ice maker towards me. It came right out. I replaced everything in reverse order. It all works great. I did verify my main control bord was at an updated release level before replacing the Ice Maker. Some of the sites I found said that both need to be replaced do not meet the recomended rev level. I don't remember what they were, I wasn't expecting to submit any instructions.
All Instructions for the PFSS6PKWASS
46-57 of 57