Quick Question!

Have you ever purchased from PartSelect.com before?

Models > PFSS6PKWASS > Instructions

PFSS6PKWASS General Electric Refrigerator - Instructions

All installation instructions for PFSS6PKWASS parts

These instructions have been submitted by other PartSelect customers and can help guide you through the refrigerator repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the PFSS6PKWASS
1-15 of 62
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Replace water filter

  • Customer: Alfred from Novato, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 207 of 306 people found this instruction helpful
Unscrew old filter and remove(counterclockwise). Line up arrow on new filter with arrow on connection housing. Turn clockwise till resistance met. Do not overtighten. Follow directions. Simple.

Pantry drawer lid had broken pivot

  • Customer: James from Painesville, OH
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 29 of 40 people found this instruction helpful
First, I have to say I live in the next state over, and I recieved the parts the next day. Yeah! OK, I removed the adjacent drawers *and the removable lower storage shelves on the doors for clearance*. Taking out the broken lid is easy. The new one is a tight fit. The right side has a raised pad on the pivot point, but the left one does not. I worked the peg (pivot point) in on the right side and slowly and carefully pushed the stationary plastic left side in slightly(and sprung the lid slightly) to get enough clearance to get in the left peg without breaking the new lid pivot. While doing this, one has to make sure the shelf immediately behind the lid is in place since there are support tabs located on it, and you will have to rework the thing if you don't get them to mate on the installation.

water running slow

  • Customer: David from Tacoma, WA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 26 of 33 people found this instruction helpful
unscrewed old filter by hand, installed new filter.

Pin for lifting the panel broke off

  • Customer: H. Peter from Shafer, MN
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 14 of 20 people found this instruction helpful
Removed the panel , snapped out the plastic window. snapped the window into the new panel , Install the new panel in the refrigerator

Hing broke to the flipper seale door betwen the french door

  • Customer: Lal from Tehachaei, CA
  • Difficulty: Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers
  • 17 of 30 people found this instruction helpful
Until I figured out that the Metal cover on the divider door had to be removed (pried out) giving access to the hidden hinges. After that the hinges could be removed and replaced.Great with giving phone thou.

slow water flow in dispenser

  • Customer: dwight from phoenix, AZ
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 9 of 11 people found this instruction helpful
opened refrigerator door located water filter location in right back corner unscrewd 1/2 turn and out it comes without shutting off water it is a snap to do by anyone and shipment was really quick thanks. People do not call a service tech for something this simple even a child tall enough can do it.

The peg broke off of the frame of the pantry cover door

  • Customer: Marsha from Fairfax Station, VA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 7 of 11 people found this instruction helpful
Repair was simple. I used a screw driver to help remover the clear window from my broken frame. The clear window just snaped right in to the new frame.

Plastic Hinge Pins Broke on the Fresh Food Door

  • Customer: Ronald from Houston, TX
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 7 of 12 people found this instruction helpful
The repair was fairly simple. The clear plastic viewing panel was removed from the old broken white plastic frame of the door. It snapped out pretty easily and installed on the new door using some care not to break anything else. Then I was able to place the hinge pin in the hole in the side frame and gently bend the door until I could fit the pin on the other side in its respective hole.

Parts Select.com process my order quickly. packaging was excellent. Pars were in original manufacturers boxes and packing. Good job!

tabs broke off that hold the flip cover on

  • Customer: Christopher from Lake Worth, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 3 of 4 people found this instruction helpful
pulled out the plastic cover which by the way is harder then reinstalling it, reinstalled it and had to put one side in and do a little bend in the middle to get the other tab in. just like new and took about 5 - 10 minutes.

thanks
><}}}}*>

frame broken

  • Customer: Jody from Lexington Park, MD
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 5 of 11 people found this instruction helpful
removed the clear window and replaced the window into the new pantry cover

replace filter

  • Customer: Marie from Philidelphia, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 3 of 6 people found this instruction helpful
just had to unscrew old one put the new one in

Bad tasting ice cubes

  • Customer: susan from hartford, WI
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 2 of 4 people found this instruction helpful
Took the old filter out and put the new one in.
Easy Breezy!!

water leak

  • Customer: William c.. from Barberton, OH
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 4 people found this instruction helpful
got new filter

Nothing to tell it was a replacement

  • Customer: Royce from Pasadena, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 1 people found this instruction helpful
Nothing to tell it was just a replacement part that the old part was removed and the new one inserted. Works like a dream Thanks

Water flow from in-door dispenser was a trickle

  • Customer: Rene from Lancaster, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
We didn't think the dispenser problem was related to the filter - we were wrong! It took less than two minutes, including opening the box and unwrapping the filter. I'll definitely be changing my filter more often - and buying it through PartSelect. Your ordering was so easy and delivery was unbelievably fast!
All Instructions for the PFSS6PKWASS
1-15 of 62