NVLR333GV0WW Hotpoint Dryer - Instructions

Removed drum, replaced bearing. Installed new belt. Reinstalled drum. No problem

Wife was out of town, visiting family. I broke the door strike by wedging the dryer door between the laundry room door, closed the laundry room door and it snapped the door strike breaking it. I ordered the part, and it shipped fast using the standard shipping, nothing fancy. Grabbed a pair of pliers and pushed the new door strike into place. It snapped right in, fits and works perfect like nothing ever happened. The wife will never know :)

The repair was simple, the old one broke off and, the new one fit to a tee. Thanks Parts select.

I removed the top of the dryer and verified the broken belt. Since the dryer is almost 20 years old, I decided to go a little further just to make sure that was all that was wrong. After I removed the drum I found the rear drum bearing worn. The parts were here in a couple days!Replacing the parts took about an hour. Getting the drum to line up with the three mounting holes was the hardest. I took three machine screws the same pitch but longer, cut the heads off them and used them as alignment pins. Now my dryer is quieter than it has been in years, all for less than 20 dollars including shipping!!

I watched video supplied from parts select, only took about 30 minutes, hardest part was putting belt back on, couldn't fit hands in easily, but once I did it, dryer is like new, can't hear a thing.

Disconnected the power removed 4 screws from top panel. Removed 2 wires, turned switch counter clockwise. remopved switch. Replaced with new switch,connected the 2 wires, put panel back inplace,put screws back in panel,plugged dryer back in. SUPER SIMPLE Total time 5 minutes

Parts arrived well in time, exactly what was needed. The latch was a snap-in process. The strike require gentile use of a pliers, and went in quickly. Thanks!

By hand, pull old out, put new in. I did not ask the question when I purchased the part so it arrived in a white color when my dryer is an almond color. I think the part store should expose colors to the next customer. Great job and very fast deliver.

removed the old lint screen, inserted the new one, if fit perfectly and it works just fine A quick,inexpensive repair that was easy to do

After removing 14 million screws, finally got smart and looked on the internet to see how to open it up. It's super easy when you do it right! Ordered parts. Woman at PartSelect was patient and very helpful. My 15-yo son actually fixed it before I got home from work. His only question was where the green vs. white slide bearings go (the old part was badly worn, so we couldn't tell). He put the green on the "top" and the white on the "sides".

It clicked right in. Thank you!