MSD2756GEW Maytag Refrigerator - Instructions

Getting the old ice maker out was not difficult - it sits on a small ridge built into the freezer and then it takes three screws to attach it to the side of the refrigerator. Three important things to remember: (1) take off the metal bar that shuts off the ice maker from the old part, the new part doesn't come with the bar; (2) keep the screws and the cap from the old ice maker as they don't come with the replacement part either; and (3) make sure you put the water tube back into the holder otherwise it will pour all over the freezer (and not into the ice tray).

unplug refrigerator, take backing off with nut driver. Pull old blade off and put new blade on. Put backing back on and plug in.

Located the relay for compressor and took it apart and shook the relay and it rattled so I knew it must have been that. Also changed the run capacitor just to be safe. Works like a charm now.

Move refrigerated and turn off water and unplug elect. Remove ice Ben and guide on right side. Move one screw on the bottom and lousen tow screws on top. Remove ice maker to unhook electrical connection. Transfer parts from old one to the new one . Revise the removal of it and when done .Plug in cord and turn on water. If you have done everything very carefully you will have ice in a few hours.Good luck.

After receiving the parts to repair the ice door, I replaced the solenoid and new chute door without problem. Then a problem I had been experiencing for well over a year, re-emerged. No Ice! I realized the icemaker was old, over 12 years and that the Teflon within the wells as well as the contacts for the timer were well worn. The ease of finding parts and the instructions provided by PartSelect, (written, video and users), I would attempt the replacement of the Ice Maker. When I examined the Freezer, I also identified that the Ice Maker shelf and enclosure (where the auger that drives the ice) was broken and barely hanging in place. I quickly identified the additional parts and ordered them. The total repair took about 60 minutes. and was treated to the sound of ice dropping into the bin by early evening. I am very pleased with the service, the quality of the products and the helpful hints from fellow users. I have added PartSelect to my IE favorites and it will be my first stop when I need repairs for any of my appliances.

I wasn't sure about the part I needed so I called the service number, they help me decide on the correct parts for my unit. This was the easiest repair I've ever done. One hex head screw and one clip in electrical connection and we were done. It took less than 5 minutes and now it works like new, no more leaking water and plenty of ice.

I simply followed the online instructions. Easiest repair job I have done. Once installed, which took about ten minutes, it was producing ice in less than two hours and is performing as it should. Had my frig not been a bottom freezer the installation would have taken less than five minutes. And to let everyone know, the on line instructions came in very handy during the removal process. Many thanks.

went to you tube and typed in model no and brand name and the video explained in simple terms how to replace the selector pad

I ordered the replacement parts on line and received it a few days later. Thought I'd wait till the weekend to install the new parts. I expected it to take longer so I waited. Boy was I wrong. The hardest part was unloading the top shelf of the freezer. And it took longer to go get the nutdriver. I should have put it in immediately. Thanks for the instructional video. Works like a dream NO LEAKS. Will use your services on other parts as needed. Don from Pittsubrgh, PA.

Followed video advice

After I priced A New refrigerator, Then I Called A Friend to see if he had any idea of the issue. He lead me to the Overload Relay. I Went on-line & read everyone elses comments. I'm Happy to have recieved the Correct part & repaired the refrigerator myself. Great service from the PartSelect person. Note# Maytag has a Recall on the Relay, depending on the Model number. The new part will not look just like the old part. Which tells me they have been having trouble with the part.

Very simple. Unscrew old filter, following instructions on new filter's box, install new one by hand.

Removed malfunctioning icemaker and discovered that inlet water line was frozen. Thawed line using hairdryer and problem resolved. Returned new icemaker to PartSelect they promptly credited my credit card account. Problem solved.

I discovered that the water inlet was freezing, then the incoming water would run into the tray. I watched the video, then removed the ice maker. I discovered the the top two screwed just had to be loosened, not removed. I removed the bottom screw and move the ice maker to the side to disconnect the wiring harness. I found it to hard to disconnect. The pinch clips did not depress as they were supposed to, but the finally release. I did the replace without unplugging the refrigerator and it went fine. Took less than 15 minutes.

I removed and inspected the old unit and found the tray coating was flaking off. I ordered the new ice maker on line, One screw and rotate unit counter clockwise about 10 degrees unlocked it from the two snap in mounts. then unplugged the wire harness and it was free. Had to put the short wire harness on new unit, reverse removal steps and it is completed and working fine.