MFI2568AEB Maytag Refrigerator - Instructions

I took out the pantry drawer, the drawer slide on the left side (2 screws), then the broken pantry end cap (three screws). Just to be sure I pulled out both crisper drawers so as not to damage those in the process. The new part matched up perfectly and all went back into place easily. I would recommend that anybody can do this repair. Easy squeezy!!

Literally removed two screws from the old unit, removed the humidity control from the old unit and put in on the new unit. Put the two screws back in and put the lid back on.

Your service saved us over $100 in a service call to get the unit repaired. The information from other people doing the same repair was valuable information.

Thanks

removed the 2 fruit & vegtable bins, glass shelf then 2 nuts from the end cap. Instaled the new end cap and rest of stuff in less than 15 min. worked great ..

I gently prised back the tab on one side of the door and slid the unit out. The replacement was just as clean being careful not to nap off the tab. The job was done in 30 seconds with no tools.

Removed shelfs above and pantry shelf . Then used 1/4" nut driver removed three screws to take left end cap off . Then removed two screws from slide rail and swapped to new one then installed whole piece back with three screws . Put shelfs back and panty shelf and door . Easy to do no skill needed .

Took it out of the box and just snapped it in place.

First off. Huge kudo's to partselect.com! I ordered the part Friday morning choosing the standard shipping, not only did it arrive in 1 day, it was delivered on a Saturday! I could not believe how fast it arrived.

I had already replaced the right side pantry end cap, so this was a no brainer. (Yeah, I have 2 young kids, ages 3 and 4, that love to close the fridge door while the pantry is open. arghhh...) The left side is easier, because you don't have to worry about the climate controls for the pantry.

Simple install process. Remove the pantry drawer by sliding it all the way out and lifting a bit. Remove the fruit and vegetable drawers. Remove the glass shelf that sits above the pantry (careful, it is glass!) Remove the 2 white brackets that secure the glass shelf, 1 in front and 1 in the way back. Unscrew the end cap. To put it back together, follow the instructions in reverse order.

Thanks PartSelect.com!!!

-Mike

Removed the drawers, glass shelf, removed the three screws with a small socket set then took out broken part. I needed to unsnap some attached slide parts after removing the assembly. Attached removed parts from the old side piece to the new side part and replace the screwws initially removed. Then I snapped the shelf flip cover into the the new right and old left side. It is good as new now. It was quite easy once I figured out how to remove the sliding parts. It took more time to clean the shelf and bootom of the drawers than it did to replace the part.

I removed the drawers (3 in all) plus the glass shelve. Next I removed two screws from side fixture and bracket that is attached to the back and installed into the new end cap assembly. Finally re-installed fixture with the 2 screws, inserted the glass shelve and 3 drawers. Also, great time to wipe inside of frig. with a wash cloth. This is the second time we've had to replace due to our dropping heavy items on the hinged area causing the hinge pin to break. Need to be more careful. It takes a 1/4 inch nut driver to remove the two screws.

the repair went great, right parts work every thanks

Super fast delivery, 4 screws and the old part was out. Cleaned hidden spots in the frig took the longest. 4 screws and it was back in. Took a couple minutes to figure out how to set the plastic conections in the back.

Removed Crisper Drawers and Glass Panel & Rail above Deli Drawer. Removed two screws and carefully removed the 3 pieces that comprise the temperature control knob and arms from their channels. Replaced Right Endcap and reassembled. Hardest part was not breaking the thin control arms as I slid them back into place. Just a shade under 20 minutes to swap out. PartSelect.com delivered the part very fast! I have them bookmarked.

Old part snapped out and replacement snapped right in - extremely easy and fast.

Removed bottom tray and middle 2 trays. Removed glass cover on bottom tray. Removed 2 screws swung the endcap inward. removed from refrigerator. Unsnapped rear arm and sliding hardware, transfered to new endcap. reinstalled with 2 screws. The 3rd screw was never installed. However the sliding tray is working fine. Simple repair

Removed end cap (2) screws transferred drawer slide(2) screws put in the new part.