All Installation Instructions for Maytag Dryer MDG6000BWW

dryer cycles but will not heat

removed front cover and turned unit on, igniter would glow red but burner would not start. ordered m series new style coil kit and installed. turned unit on and igniter came on and burner started right away. all thanks to parts select trouble shooting guide.

Parts Used:

M Series New Style Coil Kit

daniel from mercedes, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

timer knob was cracked allowing it to spin around the timer setting stem

Removed the old knob and skirt. Replaced them with the new parts. Works like new!

Parts Used:

Timer Dial Skirt

Timer Knob Base

David from Lenoir, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Problem with dryer.

Someone thought it was rollers. It was not. Maybe motor. Will check out further. Thanks for good service, Cynthia

Parts Used:

Drum Support Roller Kit

CYNTHIA from East Haven, CT
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers, Wrench set

Was this instruction helpful to you?

Thank you for voting!

no heat

Remove two screws from lint trap lift top, disconnet wires on front panel. Remove front panel and drum take out two screw from coilvalve remove and replace with new valves.

Parts Used:

Dryer Cycling Thermostat

David from Santa Maria, AL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set

Was this instruction helpful to you?

Thank you for voting!

We were given an old but funtional dryer that had to be converted to use LPG

The Maytag dryer had a removable front panel so it took only about 15 minutes to remove the front, replace the blocking plug and orifice and reinstall the front panel. I gave the repair time as 30-60 minutes since I took the time to vacuum the interior and clean the flame sensor. Great instructions were included with the kit.

Parts Used:

Gas Dryer Conversion Kit - NG to LP

Georgia from Bridgeville, CA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Wrench set

Was this instruction helpful to you?

Thank you for voting!

timer dial skirt was cracked-would just turn without setting the time of drying

took off the knob and the dial skirt replaced the old dial skirt with the new one and put the knob back on a very easy fix-it

Parts Used:

Timer Dial Skirt

Carolyn from Lacombe, LA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

pulley broke

I originally thought the belt broke, so I ordered a belt first. Once my friend broke the dryer down, it turned out to be the pulley. In any case, we still went ahead and put the new belt on since it had never been replaced anyway. I was not home when my friend put the pulley on, but my dryer is much quieter and running just great. I'm just glad I found this site online.

Parts Used:

Multi Rib Belt - 91-5/8 Inches

Twanda from Childersburg, AL
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours

Was this instruction helpful to you?

Thank you for voting!

No flame

when I see its no gas flame, i deduct the flame sensor and the electric coils not fuction, I order tru partselect and that take me like 30 min. to remplaced those parts.

Parts Used:

M Series New Style Coil Kit