All Installation Instructions for Maytag Dryer MDE17CSBGW0

very noisy

followed the you tube video, came apart ok, very bad lint problem. Vacuummed out extensively. Made repairs, very straight forward. Back together ok, still noisy but not as bad. May be the fan.

Parts Used:

Dryer Repair Kit

Christopher from Momence, IL
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

couldnt find this model dryer on the whirpool part on their site

Found this part on your site very EZ bought it you shipped to my door got it when you said it would be here open it installed it propblem over glad i found you guys will use again Very good website Keep up the good work THANK YOU

Parts Used:

Lint Filter

clyde from Harrisburg, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Old lint filter had holes in it.

removed old one installed new one.

Parts Used:

Lint Filter

John from Massanutten, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Noisy/Rattleing Tumbler

First i did some research on the internet approx.1yr ago.Just in case any problems like this or any other kind of problems should arise which it did.The whole thing is Easy all you have to have is some basic knoledge of how things work.All of this came "OFF" in (4) sections.After installing everything back it was as "Quiet"as the day we purchased it.Good for another 5yrs.Retired welder & "J.O.A.T.Julian San Antonio,Texas

Parts Used:

Dryer Repair Kit

Julian from San Antonio, TX
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers

Was this instruction helpful to you?

Thank you for voting!

My dryer had stop working and the terminal block, wires, and dryer plug burnt out

I replace the terminal block, wires , and dryer plug I unscrewed the back of the dryer and basically replace was burnt out. I was about to pay 200.00 to have it done but I looked on youtube and seen how easy it was so I just chose the site to order what I needed to be replace and it arrived quickly and more affordable to do it myself. Thanks I hope the was useful.

Parts Used:

Terminal Block - Block Only

Terminal and Wire Kit

tiffanee from antioch, TN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers, Wrench set

Was this instruction helpful to you?

Thank you for voting!

Inadequate spray from upper arm

Replace feed tube with 3rd level spinner - no tools required

Parts Used:

Feed Tube with 3rd Level Spinner

Steven from Ashland, OR
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Felt wears on the dryer lint screen

No repair. Just replaced the screens in the dryer and they slide in and out to clean. The felt gets worn fast.

Parts Used:

Lint Filter

Judy from Cloverdale, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

lint filter coming apart

removed old one, threw it away, and inserted new one.

Parts Used:

Lint Filter

Alan from Oklahoma City, OK
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Squeak and Rachet type noise

The videos really make it easy. I put my laptop on the washer next to my dryer and proceeded step by step. I also found the video that mentioned about the screws that may come loose on the baffles. I found several loose screws on the baffles which I tightened and I also found the Drum hole plug loose, so I also tightened the plug. Reassembled the unit and has been working like new since.

Parts Used:

Dryer Repair Kit

Brian from Mertztown, PA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers

Was this instruction helpful to you?

Thank you for voting!

old idler pulley was worn out

Simply slid new idler wheel on then popped thr tri ring on. The belt replacment was the hardest thing which was also easy. I think pulling the dryer away from the wall was the most difficult thing.

Parts Used:

Idler Pulley

David J from Eagar, AZ
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

Was this instruction helpful to you?

Thank you for voting!

The door would not shut

Pushed in the Door Catch, and it was fixed.

Parts Used:

Door Catch Kit

Deborah from Worcester, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Needed to vent to side due to space requirements

Upon receipt of the new vent kit, I removed the dryer from its location and took it in to the garage. This facilitated a roomier work space. The directions were easy to follow and the work to be performed was very easy in this setting.

Parts Used: