MDB9150AWS Maytag Dishwasher - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Basket Tray wore out on bottom and silverware would not hold.
I just opened the package, pulled out the baskets, separated them and put them directly in the dishwasher. The video showed the part and size of the baskets which was very helpful. The delivery was EXCELLENT!!! I would purchase from PartSelect again!
Parts Used:
-
Suzanne from South amboy, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
replace the rail stop
I bent the clip, inserted it the rail and snapped it shut. Easy as pie!
Parts Used:
-
Daniel from Merrimack, NH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
Was this instruction helpful to you?
Thank you for voting!
Spray arm fell out of top of washer because retainer had failed.
Watched on site video. Very helpful as it explained how to remove the upper and lower baskets to get at the upper cabinet nut. How to remove the nut and use a socket to compress the retainer rams so they would pass easily through the hole in the spray arm. Retainer nut replacement 1 minute. Removing and replacing baskets in machine another 5 to 10 minutes.
Parts Used:
-
James from Dayton, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
Was this instruction helpful to you?
Thank you for voting!
Plastic linkage had broken
Followed the outstanding video instructions. Your company is fantastic. Your attention to detail, the quick shipment (one day) and video ... stellar! We will be referring your company to all!!! Thank you!!!!
Parts Used:
-
Sandy from Grass Valley, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
I needed a replacement silverware basket
I took the old one out of the dishwasher and put the new one in. The new one is much nicer and heavier than the original one!
Parts Used:
-
Jillene from Green Bay, WI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Age made the clips brittle and they broke
Snapped in the new ones in a skinny minute. Just make sure you leave the old ones in the dishwasher rack until the new ones come in it can be confusing if they are removed. My wife took them out so I had to figure out how they went back in but was not a big issue. I did have to swap ends to make it right but less than fifteen minutes and like new again.
Parts Used:
-
Douglas King from Evansville, IN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
lime up
took inside front off disconnect wires pull old unit out and put new unit in then put inside front back on tighten screws was done unit works like a new machine
Parts Used:
-
myron from Indianapolis, IN
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
Was this instruction helpful to you?
Thank you for voting!
spray arm fell off
Watched the video ordered the part. It was delivered the following morning. Un screwed the spray arm holder put the spray arm and retainer in the holder then screwed the holder back in the dishwasher.
Parts Used:
-
Mr. Perry from Overland Park, KS
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Leak
I think anytime the motor needs to come out of an older dishwasher, it would be wise to replace the main gasket that goes around the motor at the same time.
Parts Used:
-
J Roy from Oak Park, IL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
plastic piece that holds spring broke
Because mine is a portable dishwasher, I had to remove top first. the sides and back are one complete unit. the torque screws are in the front, 2 on top, and 2 in rear. Then the panels can slide back to access the spring. Replace the plastic piece & hooked on the spring. Reassemble in reverse order.
Parts Used:
-
Len from Woodland Park, NJ
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
silverwear basket was cracked/
-
Marylou from Dana Point, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Old basket worn, silverware falling through holes
-
Thomas from Washington, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Old silverware basket "collapsed"
-
Lawrence from Newport, ME
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
dishwasher making scraping noise when running
Took the dishwasher apart, then went the website and found an extra part. The discharge pump housing had broken into two parts. Order the patrs needed, they came in two days and put the dishwasher back together. It was easy with the help of the website and runs like almost new
Parts Used:
-
Doug from Columbia City, IN
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Not cleaning bottom rack as wheels broke off
Snapped on 5 new wheels in under 5 minutes and this raised lower shelf to keep from hitting circulating water spigots beneath the shelf. Cleans like it was new again!
Parts Used:
-
Paul from Cave Creek, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!