LE2902 (P7804817W W) Amana Dryer - Instructions

im a car mecanic it was easy

replaced idler puller and washers

I would like to say first of all that I was amaized and pleased at how simple the ordering of this part was and while looking at the parts diagram on you website I noticed the door swing was optional and could be easily changed and the dryer came from the factory with a latch installed on both sides of the door. In our laundry room the dryer sits to the left of the washer and the door to the dryer opened to the right which has always been a slight inconvenience. . . So instead of changing out the broken part, I took the door and hinge off with my cordless screwdriver (6-8 screws) and turned it around and remounted it on the opposite side. . . Simple! I never took the new part out of the ups envelope. Now I have a spare so I taped the new part in the envelope to the back of the dryer in case I ever need it and now we have more convenience with the door swinging the correct way. Sweet deal! Took less than an hour. Thank you for making this task simple. Chuck g.

I removed two screws from the bottom panel,pulled bottom out, and lifted front panel off. Took pliers to back of the old latch to compress the expansion tabs, squeezed and removed. Pushed new one in untill it went through metal backing plate and snapped in place. Replaced the cover and screws. Opened door and took out two screws on the edge and one for the knob. Spread out door halves,used pliers to work out other latch part. Pressed in new part and reassembled. Works great for another twenty years!

Removed front of dryer, first the lower then the upper front covers. Removed front drum support, front blower housing cover. Removed belt, and then motor with housing and blower wheel attached. Broke wheel and cover off motor, placed motor in vise to remove threaded nut from motor drive shaft (nut was seized). Reinstalled motor and belt. Installed new housing and blower wheel. Reassembled dryer. Note if old blower wheel had come off repair would have taken half the time and been significantly easier to perform.

Fast delivery,,,, Easy installation

Watched the video from part select and it was easy. I will always order from part select, I loved the delivery time!! I ordered two belts, one for my dryer and one for my sons. . . My belt arrived the next day and my sons only took two days. . . Now that is service. . Thank you part select

The video that this website provided made the replacement of the door latch a breeze. Thank you for the instruction. Mary.

easy

Sooooooo easy! Ordered the part on-line and it arrived the very next day! Watched the 'how to' video on-line and the fix was a breeze. Bought my Maytag dryer back in 1989 and this is the only problem it's had. For a repair just under $5.00 plus shipping? I'll take it!

i took the front off the dryer took belt loose took the tub out the plastic nut on the blower wheel striped out so i took the blower housing apart along with the motor got vise grips on blower wheel replaced motor blower wheel belt and belt tenchinor and spring cleaned all the lint put it back together works fine

noticed that male half was in good working order, so I just snapped in the new female half; without any tools. easy repair!

I pried out the old one slightly and grabbed it with pliers. Quite possibly the metal catch dropped into the door section, but no problem. I pushed the new one into place with the side of the pliers. Probably 3 minutes time.

The repair went better than expected. I watched the video of how to replace the dryer belt and although it wasn't exactly the same, just by watching the video I was able to find my way through the process. Thank you very much for taking the time to create the video, it was very helpful and saved me a bundle of money by being able to do the repair myself.Thanks again!!! Dano, Melbourne Fl.

removed front, top cabinet, drum, belt and motor. replaced idler pulley on motor. replaced motor, belt, drum and cabinet parts. test ran fine.