Models > KRFF305ESS07 > Instructions

KRFF305ESS07 KitchenAid Refrigerator - Instructions

All Instructions for the KRFF305ESS07
16 - 30 of 654
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Light Switch broke
An easy job for smaller hands. Removed the two bolts holding the light cover. Removed two electrical connections from the old switch by pinching the retaining clip,removed the switch, snapped in the new one and re-attached the connectors. Your online illustrations helped me to know that the plastic housing for the light switch would only swing down so far and was not intended to be removed. Saved me from breaking that plastic cover's tabs. This home repair saved me more than 5 times the cost of hiring a professional to do it. Very happy homeowner.
Parts Used:
Refrigerator Door Switch
  • James Richard from St. Cloud, MN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
44 of 60 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drip pan in the back bottom was cracked during shipping and leaked
We had periodic leaks from under the Unit from new, could never figure out where it was coming from. Finally as it began to cause damage to surrounding cabinets, we took the back off and found the multiple cracks in the drip pan. Someone had hand trucked it from the wrong side! It was difficult to figure out the fan removal (it sits in the pan) but push the top forward and pull the bottom back and the fan came out. Then the pan was simple to remove / replace, by reversing the removal procedure, the fan was re installed.
Parts Used:
Drip Pan
  • David from Traverse City, MI
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
38 of 47 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Annoying sound from the fan control motor
Removed the grill and control cover in the top middle of the main compartment, removed the control, unplugged it and put in the new one. The thing that took the longest was figuring out that this was the part that needed replacing. The fridge is less than two years old and about 6 months ago the control started making these odd noises. Now it's quiet. Ah peace!
Parts Used:
Refrigerator Air Damper Control Assembly
  • James from Longmont, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
36 of 45 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Latch was broken on the filter cover and would not hold the filter in place.
Ordered a new filter cover, received in 2 days and installed it in about 5 minutes. Worked perfectly.
Parts Used:
Water Filter Cover
  • Ken from St. Geogre Island, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
34 of 49 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Had to replace a hose connector at the base of my refrig/frreezer
Perhaps a helpful hint:

When aI received the hose adapter/connector, I inserted the 2 hose ends only to have water drip from the connection.
I used a utility knife to remove an inch from each side, then reinserted the hoses. That made the differnce. Dry as a bone.

LG
Parts Used:
Water Tube Connector/Union - 5/16 to 5/16
  • Leo from Salem, SC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
43 of 76 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door gasket wasnt sealing anymore and had some minor cracks
First, I removed the old door gasket by pulling it out of the channel it was mounted in, noting the orientation of the gasket. Then, it was a simple matter of lining the new gasket up with the channel and pressing it into the groove. Very easy repair, and the door seals great!
Parts Used:
Door Gasket - Gray
  • Joel from DELRAY BEACH, FL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
26 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The light switch on the refridgerator broke - no light.
Once I saw the replacement part I understood how to pry out the switch with a small screwdriver. Then just unplug the old one, plug in the new one and pop it into place.

The PartSelect site made it easy to correctly identify the correct part, it was inexpensive, and the shipping was fast.

I'm very pleased!
Parts Used:
Refrigerator Door Switch
  • David from Albany, OR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
34 of 52 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
refrigerator came with can/holder in door
i did not need the can holder in door, we do not buy can drinks. i would rather have the full shelf space, so i replaaced the can holder with a full shelf
Parts Used:
Refrigerator Door Bin
  • CAROLYN from SPARTANBURG, SC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
27 of 31 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
needed to replace filter
Turned old one until it snapped out. Replaced it with a turn.
Parts Used:
Refrigerator Water Filter
  • Marilynn from Holland, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
30 of 41 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wife dropped a gallon of milk on the lid and cracked the see through panel
Pushed the hinge pins aside and removed the old lid.. Reversed the process to install the new lid
Parts Used:
Refrigerator Pantry Drawer Door Cover
  • Stanley from Gurley, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
23 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Center rail broke AGAIN
This is the 2nd time I had have had to replace the center rail in 2 years....
Parts Used:
Center Rail Refrigerator Water Filter
  • Diane from Glendale, AZ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
23 of 31 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Deli cover panel hinge pin broke off
Removed all of the bottom drawers and shelvs, then removed the end panel that contained the broken Deli cover hinge pin. Replaced with new panel, cleaned all of the existing parts and ten re-assembled.
Parts Used:
Pantry End Cap Kit, LH and RH
  • Scot from Tijeras, NM
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
22 of 29 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lid to chef pantry would not work.
First I removed the drawers and shelf above the pantry drawer and then removed the pantry drawer. The end cap came off very simply by removing two screws. I removed the slide attachment to the old end cap and attached it two the new end cap. I then installed the new end cap and replaced the drawers and shelf. The lid to the chef pantry popped right in place. Job complete.
Parts Used:
Pantry End Cap Kit, LH and RH
  • Rodger from Marion, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
19 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Crisper Glass Shattered While Cleaning
Since it was apparent the crisper glass is fragile I was very careful to not stress it. I opened the box then took a large board almost as big and slid it on. I carried both items to the fridge and with both doors open slid the glass into place. I am 65 yrs. Old and have owned many refrigerators but this is a first. They don't build them like they use to. .
Parts Used:
Crisper Glass Shelf Insert
  • Thomas from San Diego, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
19 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
End cap pin broken
The end cap is a very easy job to remove. Removed the three screws that hold the end cap in place using a 1/4 drive socket. Removed sliding rail which is affix to end cap to be reused with new end cap. Installed new end cap with the three screws and your done very easy. What made the job possible was the ability to identify the part from the PartsSelect.com web site which has excellent parts identification catalog.
Parts Used:
Pantry End Cap Kit, LH and RH
  • Emilio from Clinton, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
17 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the KRFF305ESS07
16 - 30 of 654