Models > KAWE565BWH1 > Instructions

KAWE565BWH1 KitchenAid Washer - Instructions

All Instructions for the KAWE565BWH1
1441 - 1455 of 1590
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Top agitator was not turning
watch the video provided by partsselect.com, very easy to understand and found the correct parts because of that also. The parts arrived the next day, much faster than I expected honstly and installed them in about 10-15 minutes. Thank's to the help provided.
Parts Used:
Agitator Repair Kit
  • Juan from Santa Maria, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
Was this instruction helpful to you?
Thank you for voting!
No spin or agitation, does fill & drain.
Never worked on a washer before, so dug around the Internet. A web search engine pulled up a description describing a coupler failure/repair, so was pretty sure it would be a simple/cheap fix. When looking for parts I came across PartSelect, and there the repair descriptions and videos made it simple.
Parts Used:
Direct Drive Motor Coupling Agitator Repair Kit
  • David from Glen Burnie, MD
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers, Socket set, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
top agitator not working
removed agitator and replaced it with new part.
Parts Used:
Agitator Repair Kit
  • John from Summerfield, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
Was this instruction helpful to you?
Thank you for voting!
Clutch Replacement
The clutch itself was fairly easy to repair. I did use some tips from youtube on disassambly, and the enclosed instructions helped to put the clutch in. There were 3 bolts I had to remove to take the drive assembly off, and 1 to pull the agitator out. And putting it back together it went in almost backwards. All in all, this is a fairly simple procedure in taking the time to complete the steps
Parts Used:
Clutch Assembly
  • Craig from Cuba City, WI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Cogs worn noisy and unbalanced upper agitater
Removed the upper sgitster by removing the center bolt to the bottom agitater. Manage to pull the cog housing apartfor inspection. left apart and ordered the new cogs. received the cogs within 30 hours and reassembled the unit and bolted it back to the main agitater. works perfect. great service. Thanks Ed PS Now my 97 year old mother in law can keep washing clothes. Shes happy again.
Parts Used:
Agitator Directional Cogs
  • Edward J from Monee, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
The washer would not run
Remove the sides of the washer, motor ran but nothing moved, closer look found drive coupling broke (10 years and it made of plastic) Order a new part from you, arrived very quickly. Install the part 10 min. later it was running.
Parts Used:
Direct Drive Motor Coupling
  • Robert from Greenville, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers, Wrench set
Was this instruction helpful to you?
Thank you for voting!
cogs needed to be replaced
Removed the cap and the unit that held the cogs or dogs. Replaced and reassembled. Took about 5 minutes.
Parts Used:
Agitator Directional Cogs
  • Charles from Madison, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Agitator wasn't agitating anything except my wife
Pop the top of the agitator off, 3/8th socket to remove the bolt holding the entire Agitator assembly, pull straight up to remove the entire agitator assembly, remove agitator dog assembly, pull plastic retainer holding agitator dogs in, replace agitator dogs, replace plastic that holds them and just put the thing back together. If it takes more than ten minutes you must have stopped for a beer break
Parts Used:
Agitator Directional Cogs
  • paul from san clemente, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
Was this instruction helpful to you?
Thank you for voting!
washer shook even when empty
replased all the springs
Parts Used:
Leveling Spring Suspension Spring Inner Tub Filter Plug Kit
  • Bernerd from Messena, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Washer would not spin after washing.
We followed the step by step video that you had posted for those parts. It is now working wonderfully. The repair man had told us it could not be repaired. Thank you so much for having these do it yourself instructions.
Parts Used:
Direct Drive Motor Coupling Clutch Assembly
  • Steve from Summerfield, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Socket set, Wrench set
Was this instruction helpful to you?
Thank you for voting!
Agitator wouldn't turn
Used agitator repair kit and it went together perfectly
Parts Used:
Agitator Repair Kit
  • Vickie from Walnut, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Wrench set
Was this instruction helpful to you?
Thank you for voting!
Machine did not agitate
Followed the video did not need to tilt machine over. Layed on floor it was more comfortable. The most difficult part was putting back on the tension band on top that's because I got a little tired on the food. Thanks for all your help. I bet I saved over $250.00 if a service tech came to fix this. You guys are the best
Parts Used:
Direct Drive Motor Coupling
  • allen from Hazlet, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
did not agitate
Took the water softener thing off, then there is another cover you just pull up on and it comes right out. pull the thing that has the agitator directional cogs ouy and replace them. Put it all back and you are done
Parts Used:
Agitator Directional Cogs
  • Tim from Wooster, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
make noise, and slow turn the top agitator
real easy i follow your video step by step those video are great txs,.
Parts Used:
Direct Drive Motor Coupling Agitator Directional Cogs Suspension Spring
  • joel from cary, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Motor coupling broke
Once you take the housing off it's only two clips to remove the water pump from the motor, then two screws and two more clips to remove the motor itself. One issue I ran into was the new coupling was hard to put on, so the first time I did I overheated the motor because it was binding (was also very hard to get the motor back on). After taking it apart again, and slightly tapping both couplings with a hammer the motor went on very easy and washer works like a champ!
Parts Used:
Direct Drive Motor Coupling
  • Wade from Presque Isle, ME
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the KAWE565BWH1
1441 - 1455 of 1590