JRS226B (AQ21B) Jenn-Air Refrigerator - Instructions
Sections
Parts
Questions & Answers
Symptoms
Videos
Instructions
All Instructions for the JRS226B
cocktails running out of ice
filled both ice cube trays up with water and placed in the freezer.. within hours my ice oproduction was doubled! no more warm cocktails : )
Parts Used:
Craig from Westminster, CA
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
56 of 61 people
found this instruction helpful.
Thank you for voting!
light bulb in water ice freezer door went bad
I didn't. Don't know how to get to light bulb to change it for this specific model
Parts Used:
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
7 of 13 people
found this instruction helpful.
Thank you for voting!
Replacing the bulb in the freezer side
Removed the ice brucket, Removed the light shield by releasing one screw using a nutdriver. Replacing the bulb and reinstalled the light shield. Your web site is one of the best and most helpfull service sites I ever used. Just wish that in the future you will ship parts overseas.
Parts Used:
Yafa (and David) from Bothell, WA
Total Repair Time:
Less than 15 mins
5 of 10 people
found this instruction helpful.
Thank you for voting!
Replace broken ice cube trays
No repair needed. I had only to wash the new ones and use them.
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
3 of 4 people
found this instruction helpful.
Thank you for voting!
oven light burnt out
1. Unscrewed glass cover on bulb 2. Removed old bulb 3. Screwed in new bulb 4. Replaced glass cover 5. Mixed drink & baked cupcakes
Parts Used:
William from Schwenksville, PA
Total Repair Time:
Less than 15 mins
3 of 9 people
found this instruction helpful.
Thank you for voting!
burned oven bulb
The hardest part was taking out original light bulb because screws on shield where hard to unscrew after all this years . The old bulb vent out leaving neck in socket. It took narrow electrical pliers to get neck out .The generic appliance bulb did not fit and had aluminum neck ,not recommended for brass sockets in ovens.Putting new light bulb in was not the problem.
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
3 of 9 people
found this instruction helpful.
Thank you for voting!
light bulb went out in my oven
My husband took the plastic cover off and took out old bulb and screwed in the new one. Then put the cover back on.
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 7 people
found this instruction helpful.
Thank you for voting!
replaced oven lightbulb
peggy ann from forest city, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 1 people
found this instruction helpful.
Thank you for voting!
Light burned out in upper oven
Screwed in light bulb and glass protector
Parts Used:
Shirley from Las Vegas, NV
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 1 people
found this instruction helpful.
Thank you for voting!
Bulb Replacement
I pulled down the wire around the glass cover. . . Released on end of the wire from its holder being careful to not let the glass cover drop. Unscrewed the bulb and replaced with replacement. Easy, easy.
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 1 people
found this instruction helpful.
Thank you for voting!
Burnt/melted light bulb and socket
Took out socket, replaced new bulb in new socket and plugged in. Easy!
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Thank you for voting!
Light bulb failure
Received the part the day after ordering. Appreciated the quick service and repair took less than a minute.
Parts Used:
Grant from Alexandria, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Thank you for voting!
Light socket not working
Pull out plastic cover #13of refrigerator part discription (temp. control and light socket), snap out old light socket and replaced with new light socket. light is now working.
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Thank you for voting!
All Instructions for the JRS226B