JDB1100AWS Jenn-Air Dishwasher - Instructions

Ordered a new part and simply placed it in where the old part was, make sure you have measured the dimensions of your space, includes a handle for easy lifting, and snap doors for small accessories

I followed the video instructions except I had no idea what tools he was using because he talked so fast, but I figured it out myself. I could not get the guard off but I worked around it. Then I took off the discharge piece. The impeller needed to come off and I unscrewed it but the impeller was stuck tight to the diswasher. It did not slide off like in the video. I ended up having to break up the impeller with pliers until it fell apart enough to take off.That was the only semi difficult part. I replaced impeller. The new screw I ordered did not fit on my machine??? So I used the old one again. I reassembled all and the dishwasher now works good. Still makes a little noise which could be normal. Nothing like it was making.

Pulled off the old wheel. Slipped on new one. Put it back in its track. Took 30 seconds.

This replacement basket fit perfectly, is well made, and came speedily, as promised!

Take out old basket throw it away. Put in new basket. time: 20 seconds. It took longer to open the package. I'm guessing at the brand, and I'm not going to my other house to find out.

After installing a new filter, :( I tried this. I wish I would have done this first since it's way cheaper and easier!!! If your dishwasher slowly starts to decline in its ability to clean the dishes, it's probably this problem.

I opened the door of the dishwasher, pulled out the old silverware basket, and then placed the new silverware basket where the old one was. The whole time, I was imagining how much it would be to call up and appliance repair guy and have him do this.

Lifted old one out. Set new one in.

Replaced the wheels with new ones I purchased from Parts Select. They just snapped right on. I will definitely use Parts Select again for any future items I need. The service was very fast and parts are marked at a reasonable price.

I just opened the package, pulled out the baskets, separated them and put them directly in the dishwasher. The video showed the part and size of the baskets which was very helpful. The delivery was EXCELLENT!!! I would purchase from PartSelect again!

I took the old one out of the dishwasher and put the new one in. The new one is much nicer and heavier than the original one!

Followed video. Everything went together fine, but leaked water around motor shaft seal. Read comments section on video and someone had the same problem. I had pushed the seal into base too deep. I pulled it out and reseated it. It worked without leaking after that. Bob

took inside front off disconnect wires pull old unit out and put new unit in then put inside front back on tighten screws was done unit works like a new machine

Dissassemble the door. Remove the control panel. Install the new panel and re-assemble the door. Make note of the orientation of the control panel plug on the circuit board. There isn't any indicator that the terminal strip is up-side down other than the new panel doesn't work.

First turn off power and water then Removed the two screws on the bottom plate, took the plate off. To remove the valve , I took one screw out of the bracket and just loosened the other,Pulled the valve out ,removed the water lines,then reused existing brass connection, put the hoses on the new valve then put it back together .Turned the water on checked for leaks, then closed it up..Turned the power on and it works great.....