GHW9100LW2 Whirlpool Washer - Instructions

Followed video clip that I found online

I am a 70 year female - went online to order the part - it arrived a day later - it was absolutely a breeze to repair - I unscrewed the old cracked handle in about two minutes and screwed the new one in in about 2 minutes or less. It couldn't have been easier. I was so pleased that I saved time and money and I could do it myself. The cost of the part was much less than I would have paid at Whirlpool and my labor was free. Thank you Parts Select for making the part available.

Unplug electric. Open door. Peel rubber bladder back from washer door seal enough to expose wire retension ring. Remove three screws that hold door latch. Remove latch. Remove three wire harnesses. With new latch, reattach wire harnesses. Insert latch. Secure to machine with the three screws. Refit door seal and secure with retension ring. Plug in electric. Done.

Simple Install. Align stubs on handle with slots in dispenser. Snap in place and replace dispenser on rollers.. Took less than 15 minutes and no tools.

Had to open the panels, remove the old drain pump and install the new one. Remember if there is water still in the hose to either take it out with a wet/dry vacuum or put towels under neither to sook the water. 15 minutes of work and your done.

I saw a u tube video and followed the presenters instructions. Very simple instruction very simple repair. The whirlpool duet is a well designed machine with the mechanical parts easily accessible. I know if if would have had a professional service come and repair if it would have cost several hundred dollars. It cost me the parts, $50. 00 (That was for the 3-pack of baffles), 1 beer and my time. "Easy fix".