All Installation Instructions for General Electric Washer GCSR2090H2WW

the knobs would not turn

removed knobs and popped new knobs on. on the washer, removed the old clip from behind the knob, removed old knob, put on new knob with new clip. very easy. the videos were soooooo very helpful, thanks so much...

Parts Used:

Control Knob and Clip - White

Timer Knob

Cathey from Hendersonville, TN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Timer Knob Replacement

Unplug appliance. Use needle nosed pliers to remove clip from behind the knob. Remove knob and replace with new knob. Push in to install the new knob until you hear the "click." There you have it. Easy. Another task completed from the "Honey-Do" list.

Parts Used:

Timer Knob

Anthony from Moreno Valley, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers

Was this instruction helpful to you?

Thank you for voting!

adjustment knob striped

worked liked a charm thankyou

Parts Used:

Dial with Compression Ring

Timer Knob

douglas from n. chesterfield, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers

Was this instruction helpful to you?

Thank you for voting!

The old knob would not let me select the wash setting.

I took the pliers pulled the plastic clip off the back of the knob and pulled the knob off the dial lifted the dial off. I pushed the new dial on then pushed the new knob on and I was done. The hardest thing was to open the plastic bags the parts came in. The next time I will use a knife or something else to open the bags

Parts Used:

Dial with Compression Ring

Timer Knob

Thomas M. from Hamilton,, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers

Was this instruction helpful to you?

Thank you for voting!

Agitator did not move

With the instructions found online, this was a quick easy repair. I used youtube to have video to show the method. Used rope to pull up agitator, used wrench to loosen bolt and then put back together. Part was delivered really fast, I recommend Partselect.com for the parts you need!

Parts Used:

Agitator Coupling

David from Albion, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench (Adjustable)

Was this instruction helpful to you?

Thank you for voting!

selector nob would not wouk

remove top panel, replace the compression clip, then replace'd the top panel, w/pliers, remove'd then plastic clip from the timer knob, remove old knob, install new one, DONE! I've never had a place that had all parts in stock, and at my door with-in 2 days! UN-BELEIVABLE! THANKS

Parts Used:

Timer Knob

RICK from SPICEWOOD, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

Was this instruction helpful to you?

Thank you for voting!

Teeth Missing on Timer Knob

I removed the plastic pin, took the knob off, put the new one on, then replaced the plastic pin. EXTREMELY easy.

Parts Used:

Timer Knob

Bryan from League City, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers

Was this instruction helpful to you?

Thank you for voting!

hole in hose

order part. replace

Parts Used:

Drain Hose

hirfa from lake worth, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench set

Was this instruction helpful to you?

Thank you for voting!

I bought this second hand and it had no hose

I watched the video you provided and I could't believe how simple it was. I'm 67 yrs old and I just followed the video instructions.

Parts Used:

Drain Hose

Maryellen from Englewood, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

broken knob and awitch

Removed rear panel replaced switch had to put larger wire terminals on the switch was large we than the old index. Replaced panel put new knob re.pair complete

Parts Used:

Control Knob and Clip - White

Clifton from Monroe, MI
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Washer wasn't agitating

We couldn't get a repair to come out - were told to buy a new because it would cost too much to fix. I did not agree. I pulled the agitator off and discovered it was not working and the agitator coupler was spinning. I ordered both and put them in myself. My washer now worked like new! All for less than $100. The service guy wouldn't eve come out for less than $175 and that did not include parts!

Parts Used: