Models > FRS6LR5EM2 > Instructions

FRS6LR5EM2 Frigidaire Refrigerator - Instructions

All Instructions for the FRS6LR5EM2
766 - 780 of 1001
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Bin broke
Snapped into place- no tools
Parts Used:
Refrigerator Door Bin
  • Alisa from Birmingham, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Ice container and auger assembly broke apart
Removed the old container, opened the replacement, put it in and it worked perfectly. Great job! Arrived quickly, well packed and in perfect shape.
Parts Used:
Ice Container and Auger Assembly
  • Sandra from Tulsa, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Ice door flapper broke in half
I followed a video I found on how to take the front off of the ice dispenser ( to me the hardest part) Once I was in there it was a matter of removing the pin and spring,then putting the new flapper in place of the old. Hardest part in reassembling was getting the spring back where it belongs. After that it was a matter of putting the ice dispenser back together and testing. Works perfectly.
Parts Used:
Ice Chute Door
  • James from Atlantic, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
water leak
two screws fingers pop the hoses off done in 4 minutes
Parts Used:
Water Filter Housing - Does NOT Include Elbow Connectors
  • Forrest from Gulfport, MS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Would not produce crushed ice.
Replaced ice maker - easy to replace but it did not fix the problem.
Parts Used:
Replacement Ice Maker
  • Gerard from Milwaukie, OR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Drawer was cracked.
Pulled out old drawer. Slid in new drawer.
Parts Used:
Lower Crisper Pan
  • Richard from Birmingham, AL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The ice crusher housing is made of plastic and a piece of it broke off,
Remove 4 screws to get the housing cover off. Remove the lock ring that holds the ice auger in place. REmove 4 screws to get the crusher housing off. Reverse the order to replace the housing. Very simple.
Parts Used:
Dispenser Crusher Housing
  • JAMES from COOSADA, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
hook broke
just installed new shelf
Parts Used:
Door Shelf
  • Larry from Lincoln, NE
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Broken shelf in the door
Replaced them
Parts Used:
Refrigerator Door Bin
  • Eugene from Holland, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
icemaker not working
first replaced dual solenoid, then ice maker. still not working. going to chase electrical next
Parts Used:
Replacement Ice Maker
  • Philip from Sheridan, AR
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Missing parts
All the bins snapped right in. Bolts for hinge fit and went right in. Kick plate snapped right in easy. Every thing easy to do. Will use these people again if we need to. Great parts and no problems.
Parts Used:
Hexagonal Screw Kickplate Grille Pan Head Screw Upper Hinge Cover Door Shelf TRIM-CABINET CORNER Refrigerator Door Bin
  • Cynthia from Castroville, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
Was this instruction helpful to you?
Thank you for voting!
Replace the handle mount
When I was moving the refrig. handles from one side to the other...I broke one of the mounts. It was SO easy to order from this place, and they ship IMMEDIATELY. Second time I have used them, and am VERY impressed.
Parts Used:
Handle Mounting Block
  • RUTH from AUSTIN, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Water dripped from water dispenser after use
Pulled fridge away from wall and unplugged. Turned off main water supply feed and removed fitting from water inlet valve. Took off back panel by removing 3 screws. Took out 2 screws holding valve to fridge. Pulled off color coded wire clips. Unscrewed each water tube connector. New valve had quick connectors so had to snip off flared ends of tubing with utility knife. Pushed tubing firmly into new valve fittings and pulled to ensure connection. Reattached wiring and reattached valve to fridge with the 2 screws. Reconnected water feed line and turned on main water feed. Checked for leaks before replacing back panel. Done. No more dripping from water dispenser.
Parts Used:
Refrigerator Water Inlet Valve
  • Jeffrey from Greenfield, MA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
Three of the four drawer supports were broken
It went okay. My husband did the job and he is handy. We both watched the little "How to" video and that was very helpful.
Parts Used:
Crisper Support - Rear
  • Linda from Turtle Creek, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
my shelfs had gotton broken do age and childen
easy as pie every thing we orded fit perfectly and was right the first ,we were happy with pricing as well it was a great exp. dealing with company and webb site thanks the Leightons
Parts Used:
Meat Drawer Rail - Left Side Meat Drawer Rail - Right Side Door Bin Refrigerator Door Bin
  • toby from bethel, ME
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the FRS6LR5EM2
766 - 780 of 1001
Back to Top