Models > FRS6LR5EM2 > Instructions

FRS6LR5EM2 Frigidaire Refrigerator - Instructions

All Instructions for the FRS6LR5EM2
676 - 690 of 1001
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
replaced water valve
The changing of the water valve was pretty straight forward. First shut the water off to the ice maker, then pull the refrigerator out. Once that is done, then I removed the cardboard covering with a cordless drill, loosened the screws that held the water valve in place. The water valve assembly is colored coordinated so disconnecting and reconnecting the lines to the new valve assembly was pretty easy. Reattached the cardboard covering pushed refrigerator back and place turn on supply line and waited for the ice maker to fill up. After several cycles on the ice maker I made one slight adjustment on the ice cube size behind the cover of the ice maker. Total time one hour, then waiting for the ice maker to cycle a few times to ensure all was working properly.
Parts Used:
Refrigerator Water Inlet Valve
  • Harold from Goldsboro, NC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
arm wouldn't go all the way down and dump ice
Took front off and found the broken spring, got new one and replaced, now works great. Make sure to unplug as the water can come on and flood the freezer.
Parts Used:
Shutoff Arm Spring
  • Ronald from Ft. Myers Beach, FL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Refrigerator was missing this shelf when we bought it.
Fit perfectly
Parts Used:
Door Bin
  • Barbara from Clarkston, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Broken crisper supports
I followed the video instructions from your site and it couldn't have been easier.
Parts Used:
Crisper Support - Rear
  • Kyle from Howe, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Freezer side kept defrosting
After receiving the parts, I clamped on the connector ends, and put on the shrink tubes. Unplug frig, took out the shelves (4) screws, unscrewed back panel (4) screws. Took old thermostat off tube, clipped (2)wires on old thermostat, splice wires, clamped connector on old wires, moved up shrink tubes, and used a heat gun to shrink the wires. Put new thermostat on the tube the old one came off of, put panel, and the shelves back. Pugged frig in. Works great!
Parts Used:
Defrost Thermostat Kit
  • Greg from Camarillo, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
The door shelf bin broke.
Ordered the new part. The pictures online were most helpful. Just compare the old part to the picture, place the order, wait two days, receive the package, open it and slide the new part in place. Very easy.
Parts Used:
Door Shelf
  • James from Las Cruces, NM
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The upper Crisper Drawer Cover cracked apart making it difficult to keep crisper closed and weight of items on shelf applied too much pressure on cover. The cantilever design of shelf once frame of cover was cracked was placing too much load in the wrong places making the shelf virtually unusable.
The repair literally to 5 minutes. Remove one shelf, slide new one in. Simple repair.
Parts Used:
Upper Crisper Drawer Cover - Glass NOT Included
  • Erica from Dunkirk, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Two broken door shelves
Wiped down the new shelves; popped them in place; done in about 1 minute each. Delivery was as expected; watched progress of packages on the Fed Ex site. Delivered as promised.
Parts Used:
Refrigerator Door Bin
  • Bonnie from Corrales, NM
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
brocken
replaced with screws driver and removed the old one put the support.thank for fast service.
Parts Used:
Crisper Cover Support - Front Meat Drawer Rail - Right Side
  • Julio from naples, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
missing door shelf
The part was delivered the next day, but I had ordered the wrong part. I sent it back and they made it really easy to return it.
Parts Used:
Door Bin
  • Sharon from Hesperia, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Door bin broke
Just ordered a new door bin replacement and installed it.
Parts Used:
Refrigerator Door Bin
  • Nancy from Apex, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
water dispenser/ice maker inop
Removed old water pump and cut off ends of all lines. Plugged them into each water inlet/outlet and turned it on. Instant water to dispenser but took about 6 hours for ice maker to get water. Had to prime the ice maker. Works great and saved a lot of money ordering parts from you. Thanks.
Parts Used:
Refrigerator Water Inlet Valve
  • Michael from White Springs, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
meat shelf was broke
got the new one replased it and it was easy plus im certified in majjor apliences
Parts Used:
Door Shelf Refrigerator Door Bin
  • michael from kennewick, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
support broke
just put it in the old hole. the hard part was getting the old one out. you have to poke the center piece in to remove. otherwise you will break your fridge. then you have to to pull the center piece out before you put new in.
Parts Used:
Crisper Cover Support - Front
  • Lisa from Mena, AR
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
water dispenser actuator broken
just follow the instructions.
Parts Used:
Water Dispenser Actuator
  • Gopal from GALLOWAY, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the FRS6LR5EM2
676 - 690 of 1001
Back to Top