FRS6LF7JS3 Frigidaire Refrigerator - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
broken drawer support rails
I took out the shelves that the supports were on and replaced the parts very easily. study it a moment before taking off the old and then snap on the new.
Parts Used:
-
Kimberley from East Schodack, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
1 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I broke the water actuator.
I removed the drip pan in the ice/water well. Then I removed the 3 screws holding the front control plate and disconected the front control from the ice/water dispenser.
I then removed the ice/water dispenser by removing 3 screws, disconecting the wire block and removing the water hose.
The actuatior was easily replaced (4 screws) and I reversed the whole process to put everything back together.
One other note, the actuatior had been redesigned and the replacement seems to be much stronger than the original... shouldn't have to do this again.
I then removed the ice/water dispenser by removing 3 screws, disconecting the wire block and removing the water hose.
The actuatior was easily replaced (4 screws) and I reversed the whole process to put everything back together.
One other note, the actuatior had been redesigned and the replacement seems to be much stronger than the original... shouldn't have to do this again.
Parts Used:
-
David from Eau Claire, WI
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
1 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken and cracked
just replaced the old broken one and put the drawer back .
Parts Used:
-
zenaida from lemoore, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
1 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The refrigerator light would not work ...even after replacing the bulb.
I used a flat head screwdriver to pry open the front of the socket as I pushed the socket toward the freezer side. I unplugged the two wires connected to the socket then re-connected the two wires to the new socket and popped the new socket back in. I then put a new light bulb in and we had light again in the fridge.
Parts Used:
-
TIM from WOODBURY, TN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
1 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the gear was stripped on the old ice maker and had to be replaced
was very easy. just ordered a new ice maker which was delivered in a few days. The installation was so simple. Just plugged the new ice maker in and hung the unit on the 2 screws. And then tightened the screws with a 1/4 in nut driver.
Parts Used:
-
Billy from CHATSWORTH, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
2 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replacing the water filter
Removed the water filter cover and then removed the water filter in place, and replaced with the new filter, replaced the cover. Repair done, less than 2 minutes.
Parts Used:
-
Eden from Washington, DC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
1 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
shelf support broke
I pull out the broken part by push the center pin thru and then rerome all the parts. I then positioned the new part in place and push in the center pin to lock. quick and easy.
Parts Used:
-
ANGEL from ORANGE CITY, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water filter plugged
The filter was readily removed by pressing the appropriate button. The replacement fiter easily slipped into place.
Parts Used:
-
Sally from Brookfield, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Refrigerator deli drawer bracket
One screw to remove the old part, and screwed in the new one. Easy as pie. Keep the screw from the old part as the new one did not have one.
Parts Used:
-
mark from charlotte, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drawer guides were broken & door was closing weird
Replaced the drawer cover/shelf. Took the door off & put in the new plate....simple.
Parts Used:
-
Robert from willits, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Socket set
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Hinges Of Bin Door Were Broken
-
john from Lakeland, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace broken Bin
-
Sean from Monclova, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wife broke the slide
-
Joe from Yorktown, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
1 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken shelves replaced
Removed old shelves with broken hinges and replaced with new from Parts Select. An exact match. THANKS!!!
Parts Used:
-
Bryan from Valdosta, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My husband dropped a bottle and broke the bottom bin on the refrigerator door.
The easiest part of the repair was picking out the part on your website. The part was received unbelievably quick. I open the package, then opened the refrigerator and slide the new bin on the door. It was great!
Parts Used:
-
Lynette from Shawnee, KS
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!